Spare Parts & Chargers

Replacement 18V battery with 3Ah capacity for the CT3142 cordless drill and driver kit, including the impact driver and hammer drill.

Replacement pressure hose for the CT1855 pressure washer, for use when the original hose is worn, split or damaged.

Genuine active gear for the Neilsen CT2293 petrol ground auger, used to replace a worn or damaged part and keep the machine ready for digging work.

Carbon brush for CT0903 and 0904, supplied as a spare component for replacing the existing carbon brush on either of the listed compatible models.

Carbon brush holder for CT0903 and 0904, supplied as a spare part for holding a carbon brush in place on the listed compatible models.

Replacement carburettor for Neilsen CT1706 and CT1900 petrol generators, useful for restoring fuel delivery and helping with starting and running issues.

Replacement handle for the CT0903 and CT0904 electric hammer chisels, listed as part 04-1 on the parts diagram and supplied as a spare part.

Rotary pressure washer nozzle for CT1855, combining a rotating high-pressure jet with a wider spray for driveways, patios, decking and stubborn grime.

Pressure washer replacement lance for the CT1971 diesel pressure washer, for replacing a worn, blocked or damaged lance during cleaning and maintenance.

Pressure washer hose connector for adapting hose connections during repair and replacement work.

Replacement left tine spare part No 50 for CT2067, suitable for repair work when the original tine is worn, damaged or missing.

Single left tyre (spare part 76) for CT2067, used to replace a worn, damaged or missing wheel on the correct side.

Replacement pet clipper blades in sizes 9 and 10 for CT3543 clippers, useful for routine grooming, tidy-ups and keeping a spare set ready.

Replacement by-pass valve assembly for the Neilsen CT1855 petrol pressure washer, used to help restore correct operation during repair and maintenance work.

Replacement carbon brushes for CT0405 and CT0012 generators, supplied in a bag of 20 for use as spare parts during generator repairs.

Replacement oil alert sensors, also listed as oil pressure switches, for CT0405 and CT0012 generators, supplied in a bag of 25.

Replacement single phase AVR for the CT0405 generator, supplied as a spare generator component for use when replacing the existing AVR.

Replacement oil controllers for CT0405 and CT0012 generators, described as oil control boards and supplied in a bag of 20 spare parts.

Replacement starter motor for CT0405 and CT0012 generators and the CT1971 diesel pressure washer, supplied as a spare component for starting system repairs.

Replacement 24V battery charger for the CT0435 cordless drill, offering a 1 hour quick re-charge for the drill battery as a spare charging unit.

Replacement 24V battery with a 1300mAh capacity, sold as a spare part for the CT0435 cordless drill.

Spare 18V lithium ion battery for CT0584, suitable as a replacement or as a second battery to keep available for the same model.

Replacement nose cone for CT0768, supplied as a spare component for replacing the nose cone on the specified model during maintenance.

Replacement plastic cowl for the CT1619 air compressor, supplied as a spare cover for replacing the existing cowl on the specified compressor.

Replacement pressure adaptor for the CT1619 air compressor.

Replacement pedal for the CT1946 coil spring compressor station, supplied as a spare component for replacing the station's existing pedal.

Replacement generator pull cord for CT1900 petrol engines, used to replace a worn, frayed or snapped starter cord during servicing and routine maintenance.

Replacement wheel, Part No.15, for CT2208.

Replacement pressure washer pump for Neilsen CT1855 2200psi petrol washers, made to fit a 20mm shaft and help restore cleaning performance.

Replacement saw chain for chainsaws with a 20in / 510mm bar, made to fit the CT2292B, MT9999, CT3795 and CT4845 models.

Replacement spark plugs for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 20 as spare plugs for maintaining the listed models.

Replacement clutch for CT2292B, MT9999 and CT3795 chain saws, supplied as a spare component for replacing the clutch on the listed models.

Replacement oil pump worm gear for chain saw repairs, compatible with CT2292B, MT9999 and CT3795.

Replacement on/off switches for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 20 for replacing switches on the specified models.

Replacement oil tank caps for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 10 as spare caps for the specified oil tanks.

Replacement fuel tank caps for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 10 as spare caps for the specified fuel tanks.

Replacement oil filters for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 50 for replacing oil filters on the listed models.

Replacement fuel filters for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 20 for replacing fuel filters on the listed models.

Replacement chain adjusters for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 50 for replacing the adjusters on these models.

Replacement oil seals for CT2292B, MT9999 and CT3795 chain saws, supplied in a bag of 25 for replacing existing oil seals on these models.

Replacement chain sprocket for CT1705, CT2292B, MT9999 and CT3795 chain saws, supplied as a spare component for replacing the sprocket on these models.

Replacement gaskets/washers for CT2292B, MT9999 and CT3795 chain saws, supplied in a pack of 100 for replacement work on the specified models.

Complete pressure washer parts set for compatible Neilsen CT1757, PP-140 and GS2254 petrol jet washers, useful for repairs, servicing and keeping units running.

Replacement pressure washer end plate and pump cover for the Neilsen CT1855, suitable for replacing a worn, cracked or damaged original part.

Replacement reverse cable spare part 90 for the Neilsen CT2067 old style model, used to replace a worn or damaged cable and restore reverse operation.

Right side replacement tyre spare part 68 for Neilsen CT2067, used to replace a worn, damaged or missing wheel and keep equipment moving properly.

Right side tine cable spare part for CT2067, supplied as Part 53 for replacing a worn or damaged cable during routine repair and servicing.

Replacement forward drive belt for Neilsen CT2067, supplied as spare part number 18 for repair and maintenance on compatible machines.