Drum Pump Electric Telescopic for AdBlue & Antifreeze

An electric drum pump for transferring AdBlue, antifreeze and other water-based liquids from drums and IBC tanks. Built with a telescopic suction tube, 2 metre hose and manual dispensing nozzle, this AdBlue drum pump gives a straightforward way to move liquids with better control during filling and transfer work.

Used for garage work, workshop use, vehicle maintenance and general fluid handling where AdBlue or coolant needs to be dispensed cleanly from storage containers. It suits users topping up fleet vehicles, agricultural equipment, vans, plant or workshop containers, and is also useful where larger drums or IBC tanks need a more practical pumping setup than manual pouring.

The telescopic suction tube extends from 850mm to 1245mm, helping it cover different container depths across 45 gallon and 205 litre drums as well as 220 to 275 gallon IBC tanks from 1000 to 1250 litres. A flow rate of 18.4 litres per minute makes it suitable for regular transfer tasks without being awkward to handle, while the compact lightweight body helps when moving between containers. The silent motor keeps noise down in busier work areas, and the on/off switch with LED indicator gives simple operation. Supplied with a 230V AC adaptor and 12V battery clips, it gives flexibility depending on where the pump is being used. A practical choice for regular servicing, coolant handling and AdBlue transfer where different container sizes are in use.

Drum pump electric telescopic specifications

• Flow rate: Pumps up to 18.4 litres per minute for steady liquid transfer.
• Tube range: Telescopic suction tube extends from 850mm to 1245mm.
• Contents: Supplied with 2m hose, manual dispensing nozzle, 230V AC adaptor and 12V battery clips.
• Application: Suitable for AdBlue, antifreeze and other water-based liquids.
• Container fit: For use with 45G and 205L drums, plus 220 to 275 gallon IBC tanks from 1000 to 1250L.
• Motor: Silenced 5 pole DC brush motor with fuse protection.
• Duty cycle: 15 minutes on, 15 minutes off.
• DC power cable: 4m long with crocodile clips.
• Nozzle spout: Stainless steel, 3/4in (19mm) outside diameter.
• Bung adaptor: Built-in 2in adaptor with 15mm adjustment and a 2in to 2.5in x 5mm buttress thread converter.
• Operating temperature: 5 to 40°C (41 to 104°F).
• Maximum viscosity: 100 cSt.
• Wetted materials: Viton, POM, stainless steel, PE, NBR and PP.
• Not suitable for: Petrol, corrosive chemicals or lacquer thinners.

A handy electric AdBlue pump for cleaner, more controlled fluid transfer from larger containers.