Drills & chisels for masonry and concrete work, including bit sets, flat and pointed chisels, and combined drilling and chiselling kits. Builders and DIY users can compare lengths, diameters and fitting types, choosing bits or chisels that match their hammer drill or breaker and the job.
Showing 1–24 of 59 resultsSorted by popularity
3-piece masonry SDS drill bit set with SDS+ shanks and 12, 16 and 25mm bits, each 450mm long, for concrete, brick and stone using SDS+ rotary hammer drills.
SDS drill chuck adaptor for fitting a standard chuck to an SDS drill, for practical workshop, site and DIY use.
3-piece masonry SDS drill bit set with 12mm, 16mm and 25mm bits, each 400mm long, for concrete, brick and stone with compatible SDS drills.
4-piece hardened steel tile chisel set with point, gauge, 20mm flat and 40mm flat chisels for tile removal, wall chasing, masonry and demolition work.
18mm x 210mm SDS concrete drill bit with a cross cutter tip and SDS-plus fitment to help produce precise fixing and anchor holes in concrete.
16 x 210mm SDS concrete drill bit with a cross cutter tip and SDS-plus shank for clean fixing or anchor holes with a consistent diameter.
15 x 210mm SDS concrete drill bit with a cross cutter tip and SDS-plus shank for cleaner, more accurate holes in concrete and masonry fixing work.
SDS concrete drill bit with a cross cutter tip and SDS-plus fitment for clean, precise fixing holes in site, renovation and building work.
13mm SDS concrete drill bit with a 210mm overall length, cross cutter tip and SDS-plus shank for clean fixing and anchor holes in concrete and masonry.
12 x 210mm SDS concrete drill bit with a cross cutter tip and SDS-plus fitment for cleaner, consistent holes in concrete, block and general masonry.
11 x 210mm SDS concrete drill bit with a cross cutter tip and SDS-plus fitment for deeper hole access during site work, building jobs and masonry drilling.
10mm SDS concrete drill bit with a 210mm overall length, cross cutter tip and SDS-plus shank for anchor, fixing and clearance holes.
9 x 210mm SDS concrete drill bit with added reach, an SDS-plus shank and cross cutter tip for clean, precise holes in concrete and masonry.
8 x 210mm SDS concrete drill bit with a cross cutter tip and SDS-plus shank for clean, consistent fixing holes in concrete and masonry.
7 x 210mm SDS concrete drill bit with a cross cutter tip and SDS-plus shank for extra reach and precise fixing or anchor holes in concrete and masonry.
6.5 x 210mm SDS concrete drill bit with a cross cutter tip and SDS Plus fitment for precise fixing and anchor holes in concrete and masonry.
6mm SDS concrete drill bit with a 210mm overall length, cross cutter tip and SDS-plus shank for fixing and anchor holes in concrete and masonry.
5.5mm x 210mm SDS concrete drill bit with a cross cutter tip and SDS Plus shank for cleaner cutting and consistent fixing holes where extra reach is needed.
5mm SDS concrete drill bit with a 210mm overall length, cross cutter tip and SDS-plus fitment for clean, precise fixing holes in concrete.
16 x 160mm SDS concrete drill bit with a cross cutter tip and SDS-plus shank for precise anchor and fixing holes in concrete and masonry.
15 x 160mm SDS concrete drill bit with a cross cutter tip and SDS-plus fitment for clean, precise fixing holes in concrete and masonry.
14 x 160mm SDS concrete drill bit with a cross cutter tip for clean, consistent holes in concrete and masonry using compatible SDS-plus hammer drills.
13mm x 160mm SDS concrete drill bit with a cross cutter tip and SDS-plus fitment for clean, consistent anchor and fixing holes in concrete and masonry.
SDS concrete drill bit with a cross cutter tip and SDS-plus shank for clean holes in concrete and masonry during fixing and installation work.
SDS drill bits for concrete and masonry, led by SDS Plus drill bits with cross cutter heads in sizes from 4mm to 18mm and lengths of 110mm, 160mm and 210mm. For deeper holes, long SDS drill bits come in 400mm and 450mm sets of 12mm, 16mm and 25mm, an 800mm set and a 1000mm extra long set, alongside an 8pc 5-12mm set in a storage box and a 5pc 5mm-12mm masonry set.
SDS chisels in 250mm lengths come in 25mm, 32mm, 40mm and 50mm widths, plus a 75mm wide blade demolition chisel, with 3pc and 4pc SDS chisel sets of flat and pointed chisels and a 12pc SDS masonry drill bit and chisel set. You will also find 77mm TCT back box cutters for single sockets, a 250mm core drill extension bar, an SDS chuck adaptor and a 3pc point and chisel set for breakers.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy