Sandblaster Pot 10 Gallon Pressurised Brass Valves

A 10 gallon pressurised sandblaster pot for abrasive blasting work on metal parts, panels and surfaces that need cleaning back before repainting or repair. Built with brass valves, a pressure gauge and a nozzle shut-off valve, it gives you controlled media flow for workshop and garage use.

Used for rust removal, paint stripping and general metal preparation, this abrasive blaster suits vehicle restoration, fabrication jobs, machinery clean-up and other workshop tasks where surface contamination needs shifting. The 2.5m hose gives useful reach around parts and frames, making it easier to work on awkward areas without constantly moving the pot. For home workshop users and trade buyers alike, it is a practical option when dealing with steel components, bodywork and other items that need a clean keyed surface before coating.

The tank has a 31cm diameter and runs at an air requirement of 6 to 18.8 cfm at 5 to 8 bar, so buyers can match it to a suitable compressor setup before use. Brass air throttling and sand metering valves help with adjustment, while the safety pressure release valve adds an important control point when depressurising the unit. A pressure gauge is fitted for monitoring, and the supplied ceramic nozzles give you a choice of wear parts ready to hand. That makes it useful for regular blasting jobs where keeping setup straightforward matters.

Sandblaster pot specifications

• Capacity: 10 gallon pressurised pot for abrasive blasting and surface preparation work.
• Hose length: Supplied with a 2.5m hose for better reach around larger parts and work areas.
• Air requirement: Runs at 6 to 18.8 cfm between 5 and 8 bar.
• Valve setup: Fitted with 3/8in. brass valves for air throttling and sand metering, plus a nozzle shut-off valve.
• Contents: Includes 4 assorted ceramic nozzles and a fitted pressure gauge with safety pressure release valve.
• Nozzle sizes: 2mm, 2.5mm, 3mm and 3.5mm ceramic nozzles.
• Also supplied: Filling funnel and protective mask (hood).
• Spare nozzles: Part number CT1803.
• Abrasive media: Suitable for aluminium oxide, bank sand, beach sand and glass beads.
• Sand grade: Above 80 grit.
• Recommended compressor: 5HP and above, with a minimum of 12 cfm.
• Wheel size: 6in.
• Dimensions: 77 x 42 x 37cm (length x width x height).

A practical choice for regular surface preparation, restoration and repair work.