Sandblasting Cabinet 220L with Blasting Gun Viewing Screen & Light

A 220 litre sand blasting cabinet for contained abrasive cleaning of metal parts and components in the workshop. Built with a steel cabinet, viewing screen and internal light, it gives you an enclosed working area for cleaning, stripping and surface preparation with better control than open blasting.

Used for workshop and body shop cleaning applications, this cabinet suits garages, fabrication work, restoration jobs and general repair work where parts need rust, paint, scale or grime removing before refinishing or reassembly. It is a practical option for cleaning brackets, fixings, small panels and other components while helping keep abrasive material and debris more contained during use.

The cabinet is fitted with a blasting gun and is suitable for use with glass beads, silicon carbide, aluminium oxide and silica sand only. Working space is 84 x 55 x 38cm, giving enough room for a range of smaller parts and routine workshop jobs, while the overall cabinet dimensions are 138 x 87 x 63cm. Air compressor delivery is rated at 60 to 120psi and 15 to 25cfm, with a maximum operating pressure of 110psi. Supplied nozzle sizes of 4, 5, 6 and 7mm give some flexibility depending on the abrasive media and the type of cleaning work being carried out. The enclosed design, viewing screen and internal illumination also help make repeated blasting work more manageable when visibility matters.

Sand blasting cabinet specifications

• Capacity: 220 litre cabinet for enclosed abrasive cleaning and surface preparation.
• Construction: Steel cabinet with viewing screen and internal light for clearer working visibility.
• Contents: Fitted with a blasting gun and supplied with 4, 5, 6 and 7mm nozzles.
• Abrasive use: Suitable for glass beads, silicon carbide, aluminium oxide and silica sand only.
• Air requirement: Compressor delivery 60 to 120psi / 15 to 25cfm, with 110psi maximum operating pressure.
• Recommended compressor: 5HP, or 3HP with a small nozzle or air jet.
• Air inlet: 1/4in BSP.
• Door: Large single side door.
• Noise level: 70dB(A).

A practical choice for regular workshop, garage and body shop cleaning work.