Dutch Pins 250mm Masons Pegs Corrosion Resistant Steel

A 250mm Dutch pins set for temporary fixing when working on plastering and masonry jobs. Made with a corrosion resistant steel shaft, these masons pegs are used for securing boards, profiles and guides in place while work is levelled and adjusted.

Used by plasterers, bricklayers and general trades, they are handy when setting up screeds, fixing temporary profiles or holding boards against a wall without conventional nailing. They suit site work, renovation jobs and repair work where parts need to be held firmly for positioning, then removed again once the job moves on. For anyone doing plastering setup or masonry preparation, they help speed up repeated fitting and adjustment.

The 250mm length gives enough reach for driving into suitable plaster and most masonry surfaces, while the steel shaft is built for repeated hammering during setup work. One of the practical advantages is the way the pin can be tapped into place for levelling, then given a final tap to tighten when everything is where it needs to be. When the fixing is no longer required, the outer end can be tapped for quick release, which is useful for temporary setups and helps avoid unnecessary damage or time wasted switching fixing methods.

Dutch pins specifications

• Size: 250mm length for temporary fixing and positioning work.
• Material: Corrosion resistant steel shaft for site, plastering and masonry use.
• Application: Used for holding profiles, boards and guides against walls.
• Function: Allows easy levelling before a final tap tightens the hold.
• Handling: Quick release by tapping the outer end when the fixing needs removing.

A practical choice for regular plastering, masonry and temporary fixing work.