Manual Wheel Lift 816kg Lever Operated Vehicle Wheel Jack with 300kg Cargo Deck

The Neilsen CT5511 Wheel Lift is a manual, lever-operated lift for raising a single vehicle wheel safely and with control. The wheel grippers clamp around the tyre, and each stroke of the hand lever raises the load a step at a time. Safety bolts lock it at the working height you need.

It has an 816kg (1800lbs) lift capacity and suits cars, off-road vehicles and vans with tyres from 50cm in diameter and up to 30cm wide. A 70mm minimum height lets it slide under low wheels, and the 730mm stroke raises the vehicle to a comfortable working height for welding, grinding, painting and general repair work. It's fully mechanical, with no hydraulics, motor or oil, so there's nothing to leak or bleed.

The lift raises one wheel at a time. Use two lifts on opposite wheels to raise an axle, or four lifts to raise the whole vehicle. Remove the gripper platforms and it doubles as a lifting trolley, with a 60 x 44cm cargo deck rated to 300kg. Front wheels and castors make it easy to move around the workshop.

Manual wheel lift specifications

• Lift Capacity: 816kg (1800lbs) per lift
• Operation: Manual hand lever with lift/lower switch (mechanical jack)
• Stroke: 730mm
• Minimum Height: 70mm
• Minimum Tyre Diameter: 50cm
• Maximum Tyre Width: 30cm
• Cargo Deck Capacity: 300kg
• Cargo Deck Size: 60 x 44cm
• Safety: Safety bolts lock the platform at each stage
• Mobility: 2 x 3in front wheels and 2 x 2.5in castors
• Construction: Heavy-duty steel
• Standard: EN 1494:2000/A1:2008
• Supplied: In 2 packages, assembly required

Please note: the lift is a lifting device only and must not be used to support a vehicle. Always use axle stands before working under a raised vehicle, and operate the lift on a solid, level floor.