CV Boot Installer Pneumatic for Uni-Fit CV Joint Boots

A pneumatic CV boot installer used to expand uni-fit CV joint boots so they can be slipped over the joint during fitting. It is an air operated expander tool made to make boot installation quicker and easier when working on driveshaft and CV joint repairs.

Used in garages, workshops and vehicle maintenance work, this type of tool is handy when replacing CV boots without struggling to stretch them by hand. It suits mechanics and regular repair work where boot changes come up often, and it can also help keep the fitting process cleaner and more controlled during servicing or repair jobs.

The expanding fingers are adjusted by the air control switch to suit the size of boot being fitted, giving better control as the boot is opened for installation. It runs at a working pressure of 72-130psi and uses a 1/4in air inlet, so it fits into a typical compressed air setup used for workshop jobs. Before use, the boot should be lubricated so it can pass over the joint correctly. For repeated CV boot replacement work, it helps reduce the hassle of fitting and makes the job more manageable.

CV boot installer pneumatic specifications

• Application: For installing uni-fit CV joint boots onto CV joints.
• Operation: Pneumatic air expander tool for quicker boot fitting.
• Control: Air control switch adjusts the expanding fingers to suit boot size.
• Maximum joint diameter: 120mm.
• Dimensions: 460 x 140 x 140mm.

CV boot air tool pressure and connection

• Pressure range: Working pressure of 72-130psi.
• Air inlet: Fitted with a 1/4in air inlet for airline connection.
• Control: The CV joint boot tool uses an air control switch to adjust the expanding fingers to suit boot size.

A practical choice for regular CV boot fitting and vehicle repair work.