Hydraulic Press Support Ring 140mm for Bearings Bushes & Hubs

A 140mm press support ring used with a hydraulic press when removing wheel bearings, bushes and hubs. It gives steady, even support around the component being worked on, making it a practical alternative to traditional V blocks or old bearing casings in workshop use.

Used for bearing and bush removal jobs in garages, workshops and vehicle maintenance settings, this ring helps support parts while pressure is applied through the press. It suits mechanics, fabricators and anyone carrying out regular servicing or repair work where hubs, bushings or bearings need controlled support during removal. For jobs where awkward components need a more stable base than improvised supports, it helps keep the setup more secure and straightforward.

The ring has a 140mm outer diameter, 120mm inner diameter and a 160mm height, with a 10mm wall and a stated 40 tonne capacity. That size makes it useful when working with larger components that need clear access through the centre while still being properly supported around the outside edge. It is intended to be used in combination with a hydraulic press and can also be used with universal press support blocks, although those are not included. For regular press work, having the right support ring close to hand helps avoid relying on worn or uneven substitutes.

Press support ring specifications

• Size: Medium, 140mm outer diameter with a 120mm inner diameter.
• Height: 160mm overall height for press support applications.
• Wall thickness: 10mm wall for solid support during removal work.
• Capacity: Rated to 40T for hydraulic press use.
• Application: Used for removing wheel bearings, bushings and hubs, and can be used with universal press support blocks.

A practical choice for regular workshop press work and bearing removal jobs.