Cylinder Hone 50-180mm Engine Bore Deglazer 4in 220 Grit

A cylinder hone for cleaning and de-glazing engine bores before reassembly or ring replacement. Used on bore sizes from 50mm to 180mm, it helps prepare the cylinder surface by removing carbon build-up and refreshing the finish inside the bore.

Useful for engine freshening, rebuild work and general workshop servicing, this tool suits anyone working on smaller engines through to larger cylinder bores. When carrying out vehicle maintenance, repairing worn engines or preparing a bore for new piston rings, a deglazer like this helps get the surface ready before parts go back together. It is a practical option for garage work, home mechanics and trade use where regular engine strip-down and reassembly is part of the job.

The 4in honing stones are supplied in 220 grit, giving a practical setup for de-glazing without overcomplicating the job. A flexible shaft helps the hone move more easily inside the cylinder, while the self-centring action supports more even stone contact as you work. Tension is adjusted by the knurled nut, so changes can be made quickly during use to suit the bore. The wide 50-180mm capacity covers a useful range of engine sizes, which makes it handy to keep ready for regular maintenance and cylinder prep.

Cylinder hone specifications

• Capacity: Suitable for engine bores from 50mm to 180mm.
• Stone size: Fitted with 4in honing stones for internal bore work.
• Grit: 220 grit stones for cleaning and de-glazing cylinder surfaces.
• Handling: Flexible shaft helps with control and access inside the bore.
• Adjustment: Knurled nut allows quick tension changes while working.

A practical choice for regular maintenance and repair work.