Threaded Cap Puller 12pc Slide Hammer Set M10 M14x1.5 700g

A threaded cap puller kit for removing caps that only have a single threaded hole to work with. This 12-piece set includes the adaptors needed to connect onto a range of threaded caps, along with a 700g slide hammer to add pulling force when parts are stuck and will not shift by hand.

Used for garage work, workshop repairs, strip-down jobs and vehicle maintenance, this slide hammer puller set helps when a threaded cap needs controlled pulling rather than levering or guessing with unsuitable tools. It suits mechanics, repair technicians and DIY users dealing with stubborn threaded parts during servicing or dismantling work. When a cap is seized or awkward to move, the adaptor range gives you more chance of matching the thread you have in front of you and getting on with the job.

The kit includes 9 connecting thread adaptors covering M10 to M4, M5, M6, M8, M10 and M12, plus M14x1.5 to M14, M16 and M18. A 260mm slide hammer gives practical reach in use without being awkward to handle, while the 700g hammer weight provides the extra pull needed for tighter caps. Also included are two connecting nuts, M10/M10 and M10/M14, to help join the setup as required. The mix of thread options makes it useful for regular maintenance where different cap sizes come up and helps avoid hunting around for separate fittings.

Threaded cap puller set specifications

• Contents: 12-piece kit with 9 thread adaptors, 1 slide hammer and 2 connecting nuts.
• Slide hammer: Weighs 700g and measures 260mm for controlled pulling force.
• Covers: M10 to M4, M5, M6, M8, M10 and M12 thread adaptor sizes.
• Thread option: M14x1.5 adaptors to M14, M16 and M18 for added job coverage.
• Connecting nuts: Includes M10/M10 and M10/M14 to complete the setup as needed.

A practical choice for regular maintenance and repair work.