Sheet Metal Nibbler 1.8mm 380W Electric 230V Steel Cutter

A 230V electric sheet metal nibbler for cutting sheet steel and stainless steel with clean, controlled results. With a 380W motor and 1800/min no load speed, it is built for shaping metal up to 1.8mm thick without the rough edge often left by other cutting methods.

Used for garage work, fabrication, vehicle repairs and general workshop jobs, this metal cutting nibbler is handy when straight cuts are not enough. It cuts in any direction and can follow curves or shaped sections, making it useful for trimming panels, cutting out repair sections, and working around awkward profiles where a standard cutter or snips can be more limiting.

The cutting capacity covers sheet steel from 0.5mm to 1.8mm and stainless steel from 0.5mm to 1.2mm, which suits a wide range of common sheet metal tasks. The smooth, burr-free cutting surface helps reduce finishing work afterwards, which is useful when fitting panels or preparing edges for the next stage of the job. For ongoing use, the cutter can be ground to restore cutting efficiency, making it a practical option for repeated workshop use.

Sheet metal nibbler specifications

• Power supply: 230V electric operation for workshop and garage use.
• Motor output: 380W motor with 50Hz input.
• Speed: No load speed of 1800/min for steady cutting action.
• Protection class: Class II.
• Protection rating: IP20.
• Noise level: Sound pressure level (LpA) 86.7 dB(A) and sound power level (LwA) 97.7 dB(A).
• Contents: Nibbler, punch, screw sleeve wrench and instruction manual.

Steel sheet nibbler cutting capacity

• Cutting range: Sheet steel capacity from 0.5mm to 1.8mm.
• Material use: Cuts stainless steel from 0.5mm to 1.2mm and can work in any direction or shape.

A practical electric nibbler for regular sheet metal cutting and repair work.