Sliding Compound Mitre Saw 10in 1800W 240V Single Bevel Laser

A 10in sliding compound mitre saw built for accurate cross cuts, mitres and bevel cuts in timber and similar workshop materials. The 240V motor, sliding action and laser guide make it a practical choice for repeat cutting where clean, consistent positioning matters.

Used for joinery, trim work, framing, fitting skirting, architrave, studwork and general woodcutting jobs, this saw suits both workshop use and on-site fitting where a mains-powered machine is preferred. The compound cutting function helps when working through angled cuts, while the sliding head gives extra reach across wider stock than a fixed-head mitre saw. For DIY projects, home improvement and regular trade cutting, this sliding saw covers the sort of straight and angled cuts that come up time and time again.

With a rated input of 1800W and a no load speed of 5000rpm, it has the power and blade speed needed for routine cutting tasks. The 255mm blade size matches the 10in format, and the single bevel setup keeps operation straightforward for users who need dependable angled cutting without unnecessary complication. Laser guidance helps with line-up before the cut, which is useful when marking out trim, framing pieces or repeated lengths. Running on a 230 to 240V 50Hz supply, this 10in compound saw is suited to standard UK mains power and works well for regular workshop or garage use where reliable setup and repeatability are important.

Mitre saw specifications

• Blade: 255mm (10in) diameter with a 30mm bore, 3.0mm thickness and 36 teeth.
• Power input: 1800W motor for routine cutting in joinery, trim and framing work.
• Supply: Operates on 230 to 240V / 50Hz mains power.
• Speed: No load speed of 5000rpm for quick, clean cutting action.
• Cutting setup: Sliding compound design with single bevel and laser guide for easier alignment.
• Blade speed rating: Maximum 7000rpm.
• Maximum cutting capacity (height x width): 72 x 300mm at 0° x 90°, 72 x 200mm at 45° x 90°, 40 x 300mm at 0° x 45° and 40 x 200mm at 45° x 45°.
• Laser batteries: 2 x AAA (1.5V), included.
• Power source: Corded electric, with a 2m PVC 1.0mm² VDE cord and UK plug.
• Supplied with: 1 x spanner, 1 x dust collection bag, 1 pair of carbon brushes, 1 x clamp and 1 x extension bar set.
• Weight: 12.9kg.
• Noise level: LpA 95dB(A), LwA 108dB(A) (K = 3dB(A)).
• Vibration level: Less than 2.5m/s² (K = 1.5m/s²).

A practical choice for regular cutting jobs in the workshop, garage or on site.