Air Tool Kit 33pc Impact Wrench Ratchet Die Grinder 90psi

A 33-piece air tool kit for buyers who want the main workshop essentials in one set rather than buying each tool separately. It includes an impact wrench, ratchet wrench, die grinder and air hammer, all set up for 90psi compressor use with a 1/4in air inlet.

Used for garage work, vehicle maintenance and general workshop jobs, this kit covers a good mix of fastening, removal, grinding and chipping tasks. Home mechanics can use it when working through repair jobs on cars and vans, while small workshops will find it handy for moving between seized fixings, detail grinding and stubborn material removal without changing to completely different equipment. The impact wrench handles tighter nuts and bolts, the ratchet speeds up lighter fastening work, the die grinder suits smaller clean-up and shaping jobs, and the air hammer is useful where extra striking action is needed.

All four tools run from the same 90psi setup, which helps keep compressor connection straightforward if you already work from an air line. The die grinder has a free speed of 22,000/min with 5cfm average air consumption, while the ratchet wrench delivers up to 150/min and 65Nm max torque. For heavier fastening, the 1/2in drive impact wrench reaches 7,000/min with 300Nm ultimate torque. The 150mm air hammer delivers 4,500 blows per minute with a 41mm stroke length and 10mm chisel shank. Supplied accessories include 5 air grinder stones, 10 impact sockets, 3 air hammer chisels, 1 connector and 5 nipples, which makes it a practical kit for regular maintenance and repair work.

Air tool kit specifications

• Contents: 4 air tools including impact wrench, ratchet wrench, die grinder and air hammer.
• Air supply: All tools run at 90psi and use a 1/4in air inlet for compressor connection.
• Die grinder: 1/4in drive model with 22,000/min free speed and 5cfm average air consumption.
• Fastening power: 1/2in drive ratchet delivers 65Nm max torque, while the impact wrench reaches 300Nm ultimate torque.
• Included extras: Supplied with 5 grinder stones, 10 impact sockets, 3 x 5in chisels with spring retainer, 1 connector (1/4in quick coupler), 5 nipples, a 4mm hex key and 2 collet wrenches.
• Socket sizes: 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27mm.
• Air ratchet: 150/min maximum speed and 4cfm average air consumption.
• Impact wrench: 7,000/min maximum speed and 5cfm average air consumption.
• Air hammer: 150mm air hammer with 4,500 blows per minute, 41mm stroke length, 10mm chisel shank and 5cfm air consumption.

A practical choice for regular maintenance and repair work.