Core Drill Bit 107mm Masonry with Pilot Drill & SDS Adaptor

A 107mm masonry core drill bit used for cutting clean, round holes through brickwork and similar materials where a standard drill bit is not suitable. Supplied with a pilot drill and SDS adaptor, it is set up for larger hole-cutting jobs such as pipe, cable and vent openings through walls.

Used across plumbing, electrical and general building work, this type of core bit is handy when fitting waste outlets, running pipework or feeding cables through masonry. It suits trade use on site as well as renovation, repair and property maintenance jobs at home, especially where a neat opening is needed for installation work without spending time widening smaller drilled holes.

The 107mm diameter makes it suitable for larger wall penetrations, while the 150mm barrel length gives useful reach for common drilling tasks. A 5-segment head handles the cutting work, and the included pilot drill helps keep the bit steady as you begin the hole, making the first cut easier to control. The supplied SDS adaptor means the required fitting parts are included, which is useful when you want to get started without sourcing extras separately. For repeated installation and maintenance work, having the pilot and adaptor included also helps keep the job straightforward.

Core drill bit specifications

• Diameter: 107mm size for larger round holes in masonry.
• Barrel length: 150mm core length for standard wall drilling reach.
• Cutting head: 5-segment design for masonry hole cutting.

Core drill starting and fitment

• Contents: Supplied with a core drill pilot bit for easier starting and better guidance.
• Fitment: Includes SDS adaptor for the intended setup.

A practical SDS core drill bit for regular installation, maintenance and building work.