Torque Limiting Stick 1/2in Drive 8in 120ft/lb 160Nm

A torque limiting stick for 1/2in drive impact tools, preset to 120ft/lb or 160Nm for controlled wheel nut tightening. Built as an 8in extension bar, it is used with air or cordless impact guns where consistent torque on wheel fixings is important.

Used in garages, tyre bays and workshop servicing, this type of extension helps reduce overtightening when fitting wheels. It suits regular vehicle maintenance, wheel changes and general servicing work where the same torque setting is needed repeatedly, making it useful for both trade use and busy home garage jobs.

The 8in or 200mm length gives practical reach when working around wheel designs and recessed fasteners, while the 1/2in drive fitment matches common impact equipment already used for wheel work. This stick is preset to a single torque value of 120ft/lb / 160Nm, so it is suited to jobs where that figure is the required setting. It is for use with air or cordless impact guns only and should not be used with breaker bars or ratchets. For regular wheel fitting work, that fixed setting helps keep the process more consistent and avoids unnecessary tool changes when the same torque figure comes up often.

Torque limiting stick specifications

• Drive size: 1/2in drive for use with compatible impact guns.
• Torque setting: Preset to 120ft/lb / 160Nm.
• Length: 8in extension bar, also listed as 200mm.
• Application: Used for controlled wheel nut tightening during servicing and wheel fitting.
• Use note: For air or cordless impact guns only, not for breaker bars or ratchets.
• Torque extension bars: This 1/2in drive, 200mm bar has a 160Nm / 120ft/lb setting for air or cordless impact guns only, not breaker bars or ratchets.
• Material: Chrome molybdenum steel.
• Colour: Black.

A practical choice for regular wheel fitting and vehicle maintenance work.