Hole Saw Set 9 Piece 6 Saws with Hex Arbor & Pilot Drill

A 9 piece hole saw set for cutting larger, clean holes where a standard drill bit is not suitable. Supplied with six cutters, a hex shaft arbor, 6mm pilot drill and 2.5mm hex key, it gives you the main parts together for common hole-cutting jobs.

Used for fitting work, site jobs and general installation tasks, this hole cutter set is handy when cutting openings for pipe runs, vents, fittings and similar applications. It suits trade use, workshop jobs and home maintenance where several hole sizes may be needed without stopping to find separate cutters. For regular drilling and fitting work, having a spread of common sizes in one pack makes setup quicker and keeps the job moving.

The included sizes are 50, 60, 65, 72, 75 and 86mm, covering a practical range for larger openings. A hex shaft arbor is supplied for mounting the saws, while the 6mm pilot drill helps start the cut in the right place before the cutter follows through. The 2.5mm hex key is included for setup and size changes, which is useful when swapping between cutters during repeated work. Keeping the arbor, pilot drill and adjustment key in the same set also helps avoid hunting around for separate parts when the next job comes up.

Hole saw set specifications

• Contents: 9-piece set including 6 hole saws, hex arbor, 6mm pilot drill and 2.5mm hex key.
• Size range: Hole saw diameters included are 50, 60, 65, 72, 75 and 86mm.
• Fitment: Supplied with a hex shaft arbor for straightforward mounting of the cutters.
• Guidance: 6mm pilot drill helps position the cut and get the hole started accurately.
• Use: Handy for vents, pipe runs, fittings and other larger hole-cutting tasks.

A practical choice to keep close by for regular fitting and site work.