Slogging Spanner 26mm 12 Point Striking Wrench 3/4in Drive

A 26mm slogging spanner built for heavy fastening work where extra striking force is needed. The 12-point box end and central 3/4in square drive make it a specialised striking wrench for loosening or tightening large nuts and bolts in restricted spaces.

Used for commercial brake caliper work on front and trailing axles, this wrench allows assembly and disassembly without removing the steering tie rod. It is also useful for seized fasteners, heavy vehicle maintenance, workshop repairs and other jobs where a standard spanner does not give enough access or impact force. When working on large fixings with index marks, it can also be used for controlled tightening by advancing the nut a measured number of marks after hand tightening.

The short, thick, stocky shape is made for hammer use, with a block end to the handle and two striking faces to help transfer force where stubborn fasteners need a shock load to move. Its compact form helps when there is not enough room to swing a large wrench, while the 12-point box end gives practical engagement on the fixing. The central 20mm / 3/4in square drive adds another drive point for compatible tools or applications where that layout is required. A useful choice for regular heavy-duty brake and fastening work where access and striking force both matter.

Slogging spanner specifications

• Size: 26mm box end for larger fasteners.
• Box end: 12-point design for practical engagement on the fixing.
• Drive: Central 20mm / 3/4in square drive.
• Striking faces: Two striking faces built for hammer-assisted use.
• Application: Commonly used for commercial brake calipers, seized nuts and stubborn bolts where space is limited.
• Slogging wrenches: This 26mm 12-point box end spanner has a central 20mm / 3/4in square drive and two striking faces for hammer-assisted use.

A practical choice for regular maintenance and repair work on heavy fasteners.