Press and Pull Sleeve Kit 22 Sleeves 5 Spindles M10-M18

This press and pull sleeve kit is a complete set of 22 press-on sleeves and 5 pulling spindles with nuts. It is suitable for silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals and rubber bearings on cars and HGVs.

Used in garages and workshops for suspension, steering and drivetrain repairs, a press and pull kit like this lets bushes, bearings and seals be drawn out and pressed in under control, rather than being hammered or levered. It suits mechanics who deal with a range of vehicles and need a spread of sleeve sizes to hand.

The sleeves have inside diameters of 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75 and 80 mm, and outside diameters of 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85 and 90 mm. The pulling spindles are M10, M12, M14, M16 and M18.

• Contents: 22 press-on sleeves and 5 pulling spindles with nuts.
• Inside diameters: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75 and 80 mm.
• Outside diameters: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85 and 90 mm.
• Spindle thread sizes: M10, M12, M14, M16 and M18.
• Suitable for: Silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals and rubber bearings.
• Vehicle type: Cars and HGVs.

A comprehensive press sleeve kit for regular bush, bearing and seal work.