Digital Multimeter 1999 Count LCD AC DC Voltage Tester

A digital multimeter with 1999 count LCD display, built for routine electrical testing around the home, workshop or bench. It covers the main day-to-day readings clearly, making it a straightforward option when you need to check voltage, current, resistance or diodes without overcomplicating the job.

Used for general fault-finding, circuit checks and basic electrical work, this meter suits home users as well as light workshop or bench use. It is handy when tracing simple issues, checking components, confirming readings before fitting parts, or carrying out routine maintenance jobs where one meter needs to cover several common tests. For DIY repairs and regular servicing tasks, having AC and DC measurement functions in one unit helps keep testing more straightforward.

The clear LCD readout gives a maximum display reading of 1999, so readings are easy to follow during everyday testing. Built-in overload protection adds a sensible layer of reassurance when moving between different measuring jobs, while the low battery indication helps you avoid starting work with a meter that needs attention. With AC voltage, DC voltage, DC current, resistance and diode testing included, it covers the functions most buyers look for in a general-purpose meter. That makes it useful for regular maintenance, quick checks and repeat testing without needing separate tools for basic electrical readings.

Digital multimeter specifications

• Display: Clear 3-1/2 digit LCD screen with a maximum reading of 1999.
• Functions: Measures AC voltage, DC voltage, DC current and resistance, with diode, continuity and battery tests and a square wave signal output.
• Protection: Built-in overload protection for safer everyday testing.
• Battery alert: Low battery indication helps show when the meter needs attention.
• Use: Suitable for home, workshop, bench and light laboratory checking tasks.
• DC voltage ranges: 200mV, 2000mV, 20V, 200V and 300V.
• DC voltage accuracy: ±(0.5%+5) on the 200mV range, ±(0.8%+5) from 2000mV to 200V and ±(1.0%+5) on the 300V range.
• AC voltage ranges: 200V and 300V.
• AC frequency range: 40Hz to 400Hz.
• AC response: Average responding, calibrated in rms of a sine wave.
• Maximum input voltage: 300V.
• Input impedance: 1M on DC voltage and about 500k on AC voltage.
• DC current ranges: 20µA, 200µA, 2000µA, 20mA, 200mA and 10A.
• Maximum input current: 10A. Above 2A, measure for less than 10 seconds at a time, with more than 15 minutes between readings.
• Fuses: 250mA/300V fast fuse on the VmA terminal and 10A/300V fast fuse on the 10A terminal.
• Resistance ranges: 200, 2000, 20k, 200k, 2000k and 20M (±(1.2%+5)).
• Diode test: Open circuit voltage about 2.8V, test current about 1mA.
• Continuity test: Buzzer sounds below about 20.
• Signal output: Square wave of about 50Hz, about 3Vp-p.
• Battery test ranges: 1.5V and 9V.
• Sampling rate: About 2 to 3 times per second.
• Battery: Takes one 9V (6F22) battery.
• Protection rating: IP20.
• Operating temperature: 0°C to 40°C, at less than 75% relative humidity.
• Storage temperature: -10°C to 50°C, at less than 85% relative humidity.
• Dimensions: 126 x 70 x 26mm.

A practical choice to keep close by for regular testing and fault-finding work.