Brake & Clutch Master Cylinder Pressure Test Kit 0-3000psi

A brake and clutch master cylinder pressure test kit used for checking hydraulic pressure across brake and clutch systems. It includes twin 0-3000psi gauges and a broad range of adaptors to help test pressure control valves, brake force regulators and pre-pressure valves.

Used for fault finding during vehicle maintenance, servicing and workshop diagnostics, this hydraulic pressure gauge kit helps when investigating uneven braking, pressure loss or differences between left and right or front and rear brake circuits. It is suited to garage work and trade use where accurate pressure readings are needed before replacing parts, and it can also be useful for more involved repair work on cars and light vehicles with compatible fittings.

The supplied adaptors cover a wide spread of thread sizes, making the kit more practical when working across different brake and clutch hydraulic setups. Twin gauges allow pressure comparison where needed, which is useful when checking pressure difference between circuits during diagnosis. The included connecting pipe and angle pieces add flexibility when access is awkward around master cylinders or brake line fittings, while the 45° and 90° connectors can help route the test setup more neatly in tighter engine bay or underbody working areas. For regular brake servicing and hydraulic fault tracing, having the common adaptor sizes together in one kit helps avoid wasted time searching for separate fittings.

Pressure test kit specifications

• Gauge range: Includes 2 pressure gauges covering 0-3000psi.
• Gauge type: Analogue gauges with an accuracy of 4% of scale.
• Connection type: JIC quick disconnect.
• Application: Used to check brake pressure control valves, brake force regulators and pre-pressure valves.
• Function: Helps determine pressure differences between left and right or front and rear brakes.
• Adaptor thread sizes: M6 x 1.0, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.0, M10 x 1.25, M10 x 1.5, 1/4" x 28UNF, 5/16" x 24UNF, 3/8" x 24UNF, 7/16" x 20UNF and 7/16" x 24UNF.
• Handling: Includes 1 connecting pipe, 1 angle connecting piece M14 x 1.5, 1 connecting pipe M8 x 1.0, plus 45° and 90° connecting pieces.
• Also supplied: Instruction manual and vehicle look-up table.

A practical brake and clutch hydraulic test kit for regular diagnostic work.