Bench Pillar Drill 16mm Chuck 16 Speed 550W 230V Drill Press

A bench pillar drill for accurate, controlled drilling in workshop, garage and repair settings. With a 16mm chuck, 16 spindle speeds and a solid bench-mounted format, it is suited to jobs where a hand drill can be harder to keep straight and consistent.

Used for drilling repeat holes, cleaner vertical drilling and more controlled work on parts that need better accuracy at the bench. Suitable for general workshop use, vehicle maintenance, fabrication tasks, fitting work and DIY repairs where metal, wood or similar materials need steady drilling with reliable support from a fixed machine.

The 230V 550W motor runs at a no-load speed of 1420rpm, while the 16-speed setup gives more flexibility when working with different drill bit sizes and materials. A B16 chuck covering 3 - 16mm gives a useful working range for common drilling tasks, and the MT2 spindle taper supports the drill press setup. The 80mm maximum drilling depth provides good capacity for deeper bench work, while the 290mm table gives a practical surface for supporting smaller components and regular day-to-day jobs. With an overall height of 980mm, it is sized for bench installation in garages and workshops where stable drilling matters. For regular maintenance and fabrication work, the speed range helps reduce the need to work around one fixed drilling speed.

Bench pillar drill specifications

• Motor: 230V / 550W / 50Hz bench drill motor for mains-powered workshop use.
• Speed range: 16 spindle speeds for adjusting drilling setup to suit different tasks.
• Chuck capacity: B16 chuck accepts 3 - 16mm drill sizes.
• Drilling depth: Maximum 80mm depth for more controlled deeper drilling work.
• Table size: 290mm table with 980mm overall machine height.
• Speed selection: Offers 16 spindle speeds for workshop tasks that require bench drills.
• Table adjustment: Tilts 0° to 45° and rotates 360°.
• Base size: 250 x 420mm.
• Column diameter: 70mm.
• Spindle distances: 170mm to column, 450mm to table and 640mm to base.
• Motor winding: Copper.
• Duty cycle: 30 minutes.

A practical choice for regular maintenance, repair and bench drilling work.