Tile Saw 600W Wet Tile Cutter Diamond Blade 230V

A 600W wet tile cutter for cutting ceramic, porcelain and similar wall or floor tiles with better control and a cleaner finish. Supplied with a diamond blade and built for 230V power, it gives a practical setup for straight cuts and angled work on common tiling jobs.

Used for bathroom, kitchen and flooring projects, this porcelain and ceramic tile saw suits DIY renovation work as well as regular trade use. It is useful when trimming tiles to size, cutting pieces to fit around corners or edges, and preparing angled cuts for neater joints. The 0 to 45 degree tilt range also helps when bevel cuts are needed, while the wet cutting setup helps reduce dust during cutting and supports cleaner workshop or site work.

The 385 x 395mm table gives a stable work surface for handling tiles during cutting, and the adjustable guide fence helps with straighter, more consistent results. A 180mm blade with 22.2mm bore and 2.2mm thickness is matched with a maximum speed of 2990rpm for controlled cutting through harder tile materials. Maximum cutting depth is 34mm for straight cuts and 21mm at 45 degrees, which covers many common installation jobs without needing to switch to another machine. For repeated tiling work, the wet cutting design is also useful for helping keep the blade cooler while in use.

Tile saw specifications

• Power: 600W motor for cutting ceramic, porcelain and similar tile materials.
• Blade size: 180mm diamond blade with 22.2mm bore and 2.2mm blade thickness.
• Cutting capacity: Maximum depth of 34mm on straight cuts and 21mm at 45 degrees.
• Power supply: 230V / 50Hz.
• Blade cooling: Water cooled blade with a water tank.
• Suitable materials: Ceramic, porcelain and stone tiles.

Diamond tile cutter support and adjustment

• Table: 385 x 395mm work surface for stable tile support during cutting.
• Adjustment: 0 to 45 degree tilting head with guide fence for straight and angled cuts.
• Cutting capacity: The ceramic tile cutter cuts up to 34mm deep on straight cuts and 21mm at 45 degrees.

A practical tile cutting saw for regular tiling, fitting and renovation work.