Showing 2401–2424 of 6412 resultsSorted by popularity
-

CT4714
£166.99 inc. VAT
In stock · Free courier delivery to selected UK postcodes3-shelf utility tool cart for the garage or workshop: 30kg per shelf, 100kg fully loaded, perforated 0.8mm panels, four 100 x 32mm wheels (2 swivel with brake), 890 x 545 x 980mm.
-

CT2225
£8.49 inc. VAT
In stock · Free deliveryHeavy duty 150mm nylon spring clamp with 50mm jaw capacity and hinged jaws for holding uneven surfaces during workshop, garage and DIY jobs.
-

CT0859
£16.49 inc. VAT
In stock · Free deliverySpray brush kit with a 3-50mm spray width and 15-50psi working pressure, supplied with 57ml and 21ml jars with covers, a 1.5m air line and regulator valve.
-

CT4175
£300.49 inc. VAT
In stock · Free courier delivery to selected UK postcodesCamshaft rebuild installation kit for selected VW Audi VAG and Porsche TDI diesel engines, used for fitting camshafts into cylinder heads during head rebuild work.
-

CT1940
£10.99 inc. VAT
In stock · Free deliveryCompact 50mm 90 degree offset angle driver attachment for 1/4in hex bits, helping you reach awkward fixings in tight spaces with drills and drivers.
-

CT4231
£113.49 inc. VAT
In stock · Free delivery11-piece 1/2in drive special socket set with 4 tooth sockets from 22mm to 75mm, for removing castellated lock nuts and grooved nuts found on ball joints, axles and other applications.
-

CT0555
£26.99 inc. VAT
In stock · Free deliveryCompact 9 piece bearing separator set for removing small gears, wheels and shaft fittings, with 15-58mm separator range and 50mm 2 leg puller jaws.
-

CT5485
£96.49 inc. VAT
In stock · Free deliveryVAG camshaft pulley holding tool set for Audi, VW, Skoda and Seat engines, used to hold pulleys and sprockets steady during engine timing work.
-

CT3433
£8.49 inc. VAT
In stock · Free delivery22 x 12cm chenille microfibre car sponge with a noodle-style surface for wet or dry washing, wiping and lifting light dirt from exterior vehicle panels.
-

CT5123
£18.49 inc. VAT
In stock · Free deliveryCamshaft locking tool kit for Audi, Ford, Seat, Skoda, Volkswagen and Volvo, used for setting and locking camshaft and crankshaft during timing belt work.
-

CT2523
£12.99 inc. VAT
In stock · Free delivery50mm TCT core drill with a pilot bit and arbor for compatible tools, used to cut round brickwork openings for pipes, cables, vents and fittings.
-

CT3210
£9.49 inc. VAT
In stock · Free delivery8in / 200mm end cutting pincers with the cutting edges across the end of the jaws and dipped rubber handles, for gripping and pulling nails and tacks close to the work surface.
-

CT3432
£7.49 inc. VAT
In stock · Free delivery22 x 17cm microfibre car wash mitt with a chenille wash side and towelling microfibre polishing side for cleaning cars, motorbikes, boats and the home.
-

CT4583
£19.99 inc. VAT
In stock · Free delivery50mm slogging ring spanner with a box end, striking face and flat pattern, made from forged and tempered carbon steel for loosening seized nuts.
-

CT2610
£6.99 inc. VAT
In stock · Free deliveryOrange high visibility vest in size XL with reflective tape and a zip front, for wearing over normal workwear on site, in warehouses, near traffic or anywhere you need to be seen.
-

CT4076
£29.99 inc. VAT
In stock · Free deliveryMercedes timing tool kit for setting camshaft timing on M276, M157 and M278 petrol engines during servicing and repair work.
-

CT4932
£42.99 inc. VAT
In stock · Free deliverySelf-centring woodworking dowel jig for 6mm, 8mm and 10mm holes in 17-60mm timber, supplied with 3 drill bushings and matching pins for furniture joints.
-

CT4653
£35.49 inc. VAT
In stock · Free deliveryTiming tool kit for aligning and locking camshafts on Mercedes-Benz M112 and M113 V6 and V8 engines, with right-hand and left-hand locking tools and a camshaft spanner.
-

CT0776
£59.99 inc. VAT
In stock · Free deliverySteel winch installation stand for winches up to 5000lb, predrilled with a 165 x 114.3mm bolt pattern, 5mm steel with a black powder coat finish.
-

CT0681
£70.99 inc. VAT
In stock · Free deliveryFolding composite garage and workshop trolley with 3 shelves, 30kg capacity per shelf, walls on three sides of each shelf and 4 large castors (2 locking); folds flat for storage.
-

CT1380
£14.49 inc. VAT
In stock · Free delivery46mm water pump wrench with 1/2in drive for older Opel and Vauxhall engines, used when adjusting water pumps for cam belt tensioning work.
-

CT1377
£13.99 inc. VAT
In stock · Free deliveryOpel and Vauxhall water pump spanner, 41mm with 1/2in drive, also suited to Chevrolet and Daewoo, for cam belt tension adjustment on older GM-based engines.
-

CT2204
£248.99 inc. VAT
In stock · Free courier delivery to selected UK postcodes50lb push along seed spreader, also for applying salt, grit or fertiliser across drives, paths, lawns and garden areas with easier, more even coverage.
-

CT2988
£7.49 inc. VAT
In stock · Free delivery5-piece 8.5mm HSS twist drill bit set for wood and metal, useful as workshop spares, replacements and for repeated drilling jobs with the same size.