Showing 5377–5400 of 6412 resultsSorted by popularity
Steel drain spade with a narrow blade and 1180mm length, useful for digging trenches, drainage channels and post holes with controlled access in tight cuts.
3-piece socket rail set with 1/4in, 3/8in and 1/2in drive holders for keeping shallow and deep sockets tidy in the garage, workshop or van.
250mm TCT blade with 30mm bore and 100 teeth for cutting aluminium, brass, bronze, copper and plastic, supplied with 20mm and 25mm reduction bushes.
250mm TCT blade with 30mm bore and 80 teeth for cutting aluminium, brass, bronze, copper and plastic, supplied with 20mm and 25mm reduction bushes.
184mm TCT blade with 48 teeth, a 30mm bore and 16mm and 20mm reduction bushes for cutting aluminium, brass, copper and plastic, rated at 8600rpm maximum.
4-piece socket adaptor set for converting between 1/4in, 3/8in and 1/2in drive sizes, useful for mixed socket sets, garage repairs and workshop use.
E20 cylinder head socket wrench with 1/2in drive, made from chrome molybdenum steel for MAN truck and bus repair and servicing work.
Rechargeable LED pocket work light with 150 lumens output, low, mid, high and flash modes, USB charging, magnet base, back magnet, pocket clip and key chain.
5-piece 1/2in drive Mercedes gearbox castellated socket set, also suited to differential and axle work, with 6mm and 8mm tooth widths and chrome molybdenum steel construction.
13-piece star bit set with 30mm and 75mm bits covering T30-T60, plus a 1/2in drive adaptor for vehicle servicing, garage repairs and workshop fastening.
88-piece mixed hex, spline and star socket set for 1/2in drive, with short and long bits suited to garage, workshop and general maintenance jobs.
18-piece Torx bit socket set with 1/4in and 1/2in drives, T8-T60 sizes and 37mm, 55mm and 100mm lengths, supplied in a tin for organised storage.
12 in 1 ratchet screwdriver set with flat, Phillips and Pozidriv bits plus magnetic extension, useful for furniture assembly, DIY repairs and general workshop jobs.
Diamond tile hole saw set with six 2273mm cutters, two 115mm diamond saw blades and arbors for tile fitting, renovation and bathroom cutting jobs.
8-piece half inch socket set with 14, 17 and 19mm hex bits and deep 27, 30, 32, 34 and 36mm 12-point sockets for drive and prop shaft work.
Universal work holder vice with round base, adjustable joint and 8 support pins for jewellery, craft work and small repair tasks on the bench.
4-in-1 socket ratchet handle with 1/4in, 3/8in and 1/2in square drives plus a 1/4in hex bit holder for garage, workshop and general repair work.
Size 10 cut resistant gloves with a 13 gauge HPPE liner and PU coating, supplied as 12 pairs for trade, workshop, handling and general maintenance use.
12V-24V auto tester for checking voltage, polarity, continuity, ignition pulse frequency and peak detection on vehicle electrical systems.
Insulated 1/2in drive socket extension bar with 250mm reach, made from chrome molybdenum steel for safer access to recessed fixings in panels and cabinets.
250mm SDS core drill extension bar for extra reach when drilling in tight or awkward access areas on building, plumbing and electrical work.
Insulated 1/2in drive socket extension bar with 125mm reach, made from chrome molybdenum steel for safer access to awkward or recessed fixings.
Pack of 3 TCT saw blades in 235mm diameter with a 30mm bore and 24T, 40T and 48T options for cutting timber, plywood and sheet materials.
12mm insulated VDE socket with 1/2in drive, made from chrome vanadium steel for electrical maintenance, fastening work and regular workshop use.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy