Showing 5545–5568 of 6412 resultsSorted by popularity
Portable airbrush booth with a foldable design, extractor, lit on/off switch and 0.7-1.7m vent hose for model, craft and hobby spraying with easier storage.
4in/100mm pad bolt slide latch for gates, sheds and doors. Padlockable for added security and supplied with fixing screws for straightforward fitting.
100mm rubber swivel castor wheel with plate mount for trolleys, benches and workshop equipment, with smooth movement and a 70kg maximum load.
Battery powered 3-in-1 telescopic work light with 30 LEDs and a torch function, handy for garage work, inspections, workshop use and jobs around the home.
6-piece glow plug socket set with 3/8in drive, 8-16mm sizes, chrome vanadium construction and universal joints for access in tight diesel engine bays.
5.5HP petrol bouncy castle inflator blower with a 163cc engine, 2700 cubic metres per hour maximum flow and a 210mm outlet for inflatables and novelty displays.
Garden hose nozzle set with connectors, adjustable sprays and quick fit fittings for watering, rinsing, outdoor cleaning and replacing worn hose parts.
Compact 1/4in drive palm ratchet socket spinner for quick fastening in confined areas, useful for automotive repairs, servicing, DIY jobs and toolbox carry.
7-piece oxygen sensor removal socket set with 1/2in and 3/8in drives and cut-away sections for sensor wiring, covering heated and non-heated lambda sensors.
75mm SDS chisel, 250mm long, with a wide blade for breaking and removing brick, concrete, masonry and stone during demolition, chasing and renovation work.
3-piece 1/2in drive wheel nut socket set with 17mm, 19mm and 21mm sizes, torque-limiting design and protective PE sleeves for safer wheel fitting.
50mm x 250mm SDS chisel with 14mm hex shaft for breaking and removing brick, concrete, masonry and stone in demolition and repair work.
3-piece torque limited impact socket adaptor set with 3/8in, 1/2in and 3/4in drives, each set to 100Nm for controlled garage and workshop use.
40 x 250mm SDS chisel for breaking and removing brick, concrete, masonry and stone during demolition, renovation and repair work.
32mm x 250mm SDS chisel with 14mm hex shaft for breaking and removing brick, concrete, masonry and stone during demolition and prep work.
25mm SDS chisel, 250mm long, with a 14mm hex shaft for breaking, lifting and removing brick, concrete, masonry and stone in demolition and prep work.
10-roll pack of yellow electrical tape, 19mm wide, for wire identification, cable bundling and light electrical repairs.
10-roll pack of 19mm white electrical tape for insulating wiring, marking cables and general workshop, garage and home repair use.
Pack of ten rolls of red electrical tape, 19mm wide, for wiring insulation and marking during site and workshop maintenance.
10-piece thin wall wheel socket set in sizes from 15mm to 24mm plus 7/8in, with 1/2in drive, a deep impact pattern and protective sleeves for alloy wheel servicing.
22mm lambda sensor socket with a 1/2in square drive and 85mm deep reach for removing and fitting sensors during exhaust and engine servicing in tight spaces.
1/2in drive 600mm breaker bar with flexi head knuckle for extra leverage on stubborn bolts, wheel nuts and seized fixings in garage or workshop use.
3-piece bevel edge chisel set with 12mm, 19mm and 25mm wood chisels for joinery, trimming, corner access and general work on softwood and hardwood.
Heavy duty 110V 16A 3 way splitter adaptor with IP44 protection, suitable for powering up to three site tools from one supply in workshop or industrial use.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy