Ribe Socket Bit Set 32pc 1/2in Drive M5-M14 4 Lengths
CT0396 £54.49 inc. VAT Out of stock32-piece Ribe socket set for 1/2in drive tools, covering M5 to M14 with four bit lengths for servicing, repair and mechanical fastening work.
Showing 6073–6096 of 6412 resultsSorted by popularity
-
-
Circlip & Snap Ring Pliers Set 2pc Spring Ratchet Locking
CT2304 £59.49 inc. VAT Out of stock2-piece circlip pliers set with spring ratchet locking action, 3.5mm tips set at 90 degrees and alternative tip sets for snap ring work.
-
Air Hose 15m 50ft Rubber Compressor Air Line 3/8in BSP Brass
CT0003 £29.49 inc. VAT Out of stock15m air compressor hose in flexible rubber, with 3/8in BSP brass connectors and a 300 PSI working pressure rating for pneumatic tools and spray painting.
-
Spline Bit Socket Set 1/2in Drive 26pc Mixed Length
CT0395 £59.49 inc. VAT Out of stock26-piece spline bit set with 1/2in drive sockets in M5-M16 sizes and 55mm, 100mm, 140mm and 200mm lengths for recessed and awkward workshop fasteners.
-
Wheel Lift 1.5 Tonne Air Hydraulic for 19in-29in Wheels
CT6643 £876.49 inc. VAT Out of stockAir hydraulic wheel lift with 1.5 tonne capacity for handling 19in-29in wheels, with a 100-735mm lift range for easier removal and refitting.
-
Inverter Generator 4.0kW Dual Fuel Petrol LPG Remote Start
CT6640 £1,151.99 inc. VAT Out of stockDual fuel petrol generator with maximum output of 4.0kW on petrol or 3.6kW on LPG, remote start and 230V AC, 12V DC and USB outputs for backup use.
-
Fuel Feed Pipe Pliers 9in 225mm for Alfa Audi Fiat Volvo VW
CT2096 £12.49 inc. VAT Out of stock9in / 225mm fuel pipe pliers for removing and refitting connectors around in-line fuel filters on compatible vehicles during servicing and repairs.
-
2 X One Handed 6″ 150mm Speed Clamp Carpenters Woodwork Hand Clamping Clamps
D0950X2 £14.99 inc. VAT Out of stock#N/A!
-
Wheel Hub & Driveshaft Puller Set 15 Ton Hydraulic Universal
CT3776 £118.49 inc. VAT Out of stockHydraulic wheel hub puller and driveshaft release set for almost all 3, 4, 5 and 6 hole hubs, including a large slide hammer for controlled removal.
-
Alternator Pulley Tool Set for Ford EcoBlue T50 17mm Hex
CT6619 £10.49 inc. VAT Out of stockAlternator pulley removal tool set for Ford EcoBlue engines with T50 and 17mm hex tools for correct access when removing overrun alternator pulleys.
-
Glove & Tissue Box Holder Magnetic Steel Wall Mount
CT6617 £13.99 inc. VAT Out of stockMagnetic steel holder for glove or tissue boxes up to 143mm wide, keeping essentials off the bench and easy to reach in workshops, garages and work areas.
-
Torque Wrench 1in Drive 140-980Nm Reversible Ratchet
CT4616 £121.99 inc. VAT Out of stockHeavy duty 1in drive wheel nut torque wrench with a 140980Nm range, 8 marked settings and a reversible 18-tooth ratchet for large fasteners.
-
4 Leg Lifting Chain Sling 1m 4 Ton Heavy Duty
CT2064 £96.49 inc. VAT Out of stockHeavy duty 1m 4-leg chain sling with 4 ton capacity for lifting work in workshops, garages, yards and site use.
-
Brake Pipe Flaring Tool 3/16in SAE 4.75mm On Vehicle Set
CT6597 £16.99 inc. VAT Out of stockCompact car brake pipe flaring tool for 4.75mm and 3/16in lines, producing SAE double flares in copper, copper-nickel and steel pipes on the vehicle.
-
Adjustable Tap Chuck Socket 1/2in Drive for M13-M19 Taps
CT6585 £15.99 inc. VAT Out of stock1/2in drive adjustable tap socket for M13 to M19 thread taps, with adjustable jaws for manual thread cutting using compatible ratchets or wrenches.
-
Rear Axle Bush Service Kit for BMW Bush Removal & Fitting
CT0587 £50.49 inc. VAT Out of stockRear axle bush service kit for BMW models including E38, E39, E52, E53, E60 and E70 for controlled bush removal and fitting work.
-
Adjustable Tap Chuck Socket 1/4in Drive for M3-M8 Taps
CT6582 £10.99 inc. VAT Out of stockAdjustable tap holder socket for M3 to M8 taps, fitting a 1/4in drive manual wrench or ratchet for hand thread cutting and cleaning in tighter spaces.
-
Deep Impact Socket 110mm 1in Drive CR-MO
CT6576 £52.99 inc. VAT Out of stockHeavy-duty 110mm deep impact socket in CR-MO steel, with a 1in drive, 110mm height and pin and O-ring retention for impact wrench and manual fastening work.
-
Deep Impact Socket 95mm 1in Drive CR-MO
CT6573 £36.49 inc. VAT Out of stock95mm deep impact socket with 1in drive, CR-MO construction and pin with O-ring retention for heavy fastening work on large nuts, bolts and studs.
-
Deep Impact Socket 90mm 1in Drive CR-MO 100mm
CT6572 £32.49 inc. VAT Out of stock90mm deep impact socket with 1in drive and CR-MO construction, built for larger fixings where extra reach is needed with manual tools or impact wrenches.
-
Deep Impact Socket 85mm 1in Drive CR-MO
CT6571 £29.99 inc. VAT Out of stock85mm deep socket in CR-MO for tools that accept 1in drive impact wrench sockets, with a 100mm overall height for reaching larger recessed fixings.
-
Deep Impact Socket 80mm 1in Drive CR-MO
CT6570 £26.99 inc. VAT Out of stock80mm deep impact socket with 1in drive, made from CR-MO steel for heavy fastening work with impact wrenches or manual tools where extra reach is needed.
-
Hose Clip Nut Driver 6mm 7mm 8mm Flexible Shaft 1/4in Drive
CT1862 £13.49 inc. VAT Out of stockFlexible-shaft hose clip nut driver for tightening and loosening matching hose clip nuts, with a 1/4in.Dr connection and reversible sockets.
-
Deep Socket 17mm 1/2in Drive 72mm CrMo for Strut Channel Fixings
CT6831 £10.99 inc. VAT Out of stock17mm deep 1/2in drive CRMO socket with 72mm length for Unistrut type channel fixings, giving clearance over long studs in channel support work.