Water Pump Sprocket Holding Tool for GM Ecotec Engines
CT6449 £19.49 inc. VAT In stock · Free deliveryGM Ecotec water pump sprocket holding tool, used to keep the timing chain and gear in place during water pump removal or refitting.
Showing 1033–1056 of 6412 resultsSorted by popularity
-
-
Timing Belt Tensioner Tool for Fiat Alfa Romeo Vauxhall
CT5576 £19.49 inc. VAT In stock · Free deliveryUniversal timing belt tensioner tool for selected Fiat, Alfa Romeo, Vauxhall, Saab, Suzuki and Lancia diesel engines during timing belt work.
-
Valve Spring Compressor 3/4in to 1-1/16in Small Engine Tool
CT6372 £19.49 inc. VAT In stock · Free deliveryHeavy duty spring compressor for small engine valves, covering 3/4in to 1-1/16in springs with two jaw sizes, a rigid frame and a 65Mn head.
-
Lump Sledge Hammer 4lb Fibreglass Handle
CT5933 £16.49 inc. VAT In stock · Free delivery4lb lump hammer with a 55cm fibreglass handle and 60cm overall length for controlled striking in building, demolition and landscaping work.
-
Harmonic Balancer Puller Kit for Chrysler GM Hyundai Mazda
CT5932 £30.49 inc. VAT In stock · Free delivery3-jaw crankshaft pulley puller kit for compatible vehicles, with a harmonic balancer holding tool and forcing rods in 3 lengths for removal and refitting.
-
Coil Spring Compressor 450mm MacPherson Strut Universal
CT4978 £157.49 inc. VAT In stock · Free deliveryMacPherson strut spring compressor with a 450mm telescopic screw body, 100-250mm jaw range and maximum clamp force of 2300kg for spring assembly work.
-
Replacement Blades 10pc for Wheel Lock Removal Set
CT5891 £20.99 inc. VAT In stock · Free delivery10-piece replacement blade set for the Neilsen CT5132 locking wheel nut removal set, helping keep your wheel lock removal kit ready for regular garage use.
-
Building Profile Stabiliser Clips for Blakes Set of 2
CT6253 £9.49 inc. VAT In stock · Free deliverySet of 2 external stabiliser clips for Blakes building profiles, supplied with screws for secure fitting, replacement of missing parts, and added profile support.
-
Combination Spanner Set 8-24mm 14pc Metric Drop Forged
CT0198 £16.49 inc. VAT In stock · Free delivery14-piece combination metric spanner set covering 8-24mm, with open and ring ends, drop forged construction, an anti-skid matt finish and a storage case.
-
Wheel Chocks 2pc Holder Brackets for Van Trailer Caravan
CT6229 £12.49 inc. VAT In stock · Free deliveryPair of van wheel chocks with holder brackets and eight mounting screws, each 22 x 9 x 11cm, also suitable for cars, trailers, caravans and light farm trailers.
-
Flywheel Locking Tool for BMW MINI Crankshaft Pulley Set
CT5836 £19.99 inc. VAT In stock · Free deliveryCrankshaft pulley locking tool set that holds the flywheel on compatible BMW and MINI engines, including counter holder, sleeves and fixing screws.
-
Sack Truck 3 in 1 Heavy Duty Trolley 300kg Pneumatic Tyres
CT4187 £112.49 inc. VAT In stock · Free deliveryHeavy duty sack truck trolley with a 3 in 1 design, 10in pneumatic tyres and an extendable loading platform for moving bulky loads at work or home.
-
CV Boot Clip Pliers 3/8in Drive for Oetiker Clamps
CT3909 £12.99 inc. VAT In stock · Free deliveryCV boot clamp pliers with 3/8in drive holes in the handles for torque wrench use, designed to press clip tops and form spring loops during fitting.
-
Radiator Valve Step Wrench 1/2in Internal Hex
CT0484 £11.49 inc. VAT In stock · Free deliveryRadiator step wrench with a 1/2in hex drive and stepped chrome vanadium body for turning valve tails, lugs, nipples and tank connectors.
-
Masonry Chisel 25mm x 460mm Flat Blade for Brick & Block
CT0470 £12.49 inc. VAT In stock · Free deliveryBrick chisel with a 25mm flat blade and 460mm length for hand chipping, trimming, removing masonry and clearing old mortar from damaged sections.
-
Valve Keeper Remover/Installer Kit 4.5mm-7.5mm OHV Engines
CT5756 £24.49 inc. VAT In stock · Free deliveryValve keeper remover and installer kit for OHV engines with 4.5mm to 7.5mm or 5/16in to 3/8in valve stems, with magnetic keeper capture for easier valve work.
-
Pedal Adjuster 710mm Brake & Accelerator MOT Testing Tool
CT5738 £20.99 inc. VAT In stock · Free delivery710mm pedal adjuster for holding brake or accelerator pedals during MOT, emissions and brake light checks in garages and workshop testing work.
-
Claw Hammer 8oz Stubby Short Handle Steel Rubber Grip
CT2765 £9.49 inc. VAT In stock · Free deliveryCompact 8oz stubby claw hammer with steel construction, a short handle and soft rubber grip for driving and pulling nails during light carpentry and repairs.
-
Open Ended Spanner 50mm Drop Forged Black Phosphate
CT2713 £13.99 inc. VAT In stock · Free delivery50mm open spanner with a single jaw, drop forged construction and black phosphate finish for side access to larger fasteners where clearance is limited.
-
Long Nose Pliers 4.5in Mini Slim Jaws PVC Rubber Grip
CT1165 £6.49 inc. VAT In stock · Free deliveryCompact 4.5in mini nose pliers with slim long jaws and PVC and rubber coated grips for holding, gripping and adjusting small parts during light repairs.
-
Magnetic Pick Up Tool 50cm Telescopic Back Scratcher
CT4354 £8.49 inc. VAT In stock · Free deliveryMagnetic telescopic pick up tool extending to 50cm for retrieving small metal parts, with a claw hand, bottle opener and back scratcher function.
-
Steel Rule 24in Stainless Steel Straight Edge
CT1472 £7.49 inc. VAT In stock · Free delivery24in hardened stainless steel rule for accurate measuring, marking and straightedge work in woodworking, metalworking, workshop and general DIY use.
-
Inner Tie Rod End Tool 25-55mm Steering Rack 1/2in Drive
CT3739 £28.99 inc. VAT In stock · Free deliveryUniversal inner tie rod end tool with 25-55mm capacity and 1/2in drive, made for steering rack removal and fitting during garage, workshop and servicing work.
-
Wheel Bearing Tool 85mm for Audi VW Front Hub Removal Kit
CT3763 £79.49 inc. VAT In stock · Free delivery85mm front wheel bearing removal tool and installation kit for compatible vehicles, with a high strength spindle for in situ hub and bearing work.