Showing 1513–1536 of 6412 resultsSorted by popularity
6 speed dual clutch transmission tool kit for compatible Ford, Volvo, Dodge and Chrysler models, used for safer gearbox removal and refitting work.
Heavy duty 1800mm T-bar sash clamp in cast iron for holding frames, panels and larger assemblies steady during gluing, fitting and joint work.
Four 600 x 600mm anti-fatigue foam floor mats with water resistant construction, covering up to 1.44m² in workshops, garages and hard-floor work areas.
Fibreglass tyre bead retainer for holding the bead in place during wheel rim mounting. Useful for tyre fitting, garage work and general workshop use.
700mm slate ripper for removing damaged roof slates and shearing fixing nails under overlapping coverings during repair and maintenance work.
1200lb hand ratchet winch with a 10m x 3/16in steel cable, galvanised steel frame and safety latch hook for controlled pulling and trailer loading.
13-piece motorcycle tyre levers and valve tool kit with 370mm spoons, three rim protectors and six brass valve cores for fitting and removing tyres.
10 ton hydraulic hub puller for 4 and 5 bolt hubs with a 96-125mm bolt circle, used to press axle shafts from hubs during bearing and driveshaft repairs.
7 piece grease gun adaptor set with nozzles, hose and extension for most manual grease guns, helping with awkward access and a wider range of lubrication jobs.
66mm VW and Skoda wheel bearing tool for compatible combined front hub units, with a ball bearing spindle, plates and divided shells for fitting and removal.
Timing chain tool kit for selected 2.7, 3.0, 4.0 and 4.2 diesel engines, with crankshaft adjusters, locking pins, tensioner pins and sprocket tools.
Clutch fitting tool for compatible diesel engines, keeping the clutch centre plate centred on the flywheel during clutch cover plate installation.
Crankshaft locking pin M14 x 1.5 for Audi FSI engine timing work. Used to hold the crankshaft at TDC during timing belt replacement and servicing.
Fuel pump sprocket remover for Hyundai and Kia chain drive CRD diesel engines, covering 1.1 to 1.7 litre models for timing and fuel system work.
Compact 100mm adjustable wrench with an adjustable jaw for small nuts and bolts, suited to garage work, home maintenance and DIY repairs.
1/2in drive suspension joint pin nut socket for selected Citroen and Peugeot models, used on castellated suspension joint nuts during front suspension servicing.
5-piece strut socket set for holding damper shafts during strut nut removal and refitting, used with a 22mm spanner or socket on compatible vehicles.
1/4in socket adapter for use with a 10mm ratchet spanner, giving a low profile drive option for tight access mechanical, garage and workshop jobs.
Rechargeable red LED warning light set with wireless operation and magnetic bases, suitable for recovery vehicles, breakdown use, trucks and agricultural vehicles.
18mm deep socket with 1/2in drive for recessed fixings and longer studs, providing added reach during garage servicing, workshop repairs and maintenance.
Red rear triangle reflector with screw-fit fixing for trailers, caravans, RVs and gateposts. A practical warning marker for visible rear marking outdoors.
Oil filter removal wrench with a wide adjustable band for 76-98mm screw-on filters, a 90 degree swivel head and vinyl handle for confined spaces.
Replacement pull cord starter spare part to fit the Neilsen Ground Auger CT2293, useful for restoring reliable starting on a worn or damaged machine.
18+ ID checkWindscreen wiper blade cutter for trimming worn rubber edges, supplied with a cleaning sponge for preparation and usable twice per blade.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy