Power tools & accessories for DIY users and workshop tasks, covering powered equipment alongside drilling, cutting, sanding and polishing accessories. Browse cordless tool kits, drill bit sets, grinder discs and polishing kits, matching the tool or attachment to the work and its required fitting.
Showing 385–408 of 673 resultsSorted by popularity
36-piece set of drill mounted grinding wheels with 1/4in shanks, assorted 1in to 2.5in diameters and coarse and fine grits for grinding and smoothing tasks.
18V 1/2in drive battery impact wrench with up to 600Nm torque, a 4.0Ah Li-Ion battery, 100-minute charger and carry case for garage and workshop use.
35mm bi-metal hole saw with a maximum cutting depth of 38mm, used on wood, plastic and light metal to cut openings for pipework, fittings, panels and cable runs.
18V cordless tyre inflator with an LCD pressure gauge, pressure preset and automatic shut off, supplied with battery, 230V charger, hose and adapters.
Pack of 5 350mm metal cutting discs with 25.4mm bore, rated to 4400rpm and 80m/s for larger metal cutting jobs in workshops, garages and trade use.
230V 1100W electric polisher and sander with a 180mm disc, variable speed and electronic speed control, running at up to 3000rpm with no load.
180mm hook-and-loop backing disc for sanding and polishing with the CT1034 230V electric polisher, supplied as a replacement head pad.
Replacement 18V battery with 3Ah capacity for the CT3142 cordless drill and driver kit, including the impact driver and hammer drill.
Multi-buy set containing 1 x wire brush set brass wheel end & cup 1/4in shank and 1 x wire brush. 6-piece brass rotary wire brush set with wheel, cup and end brushes from 1in to 4in diameter, on 1/4in shanks, for rust, paint and corrosion removal.
32mm bi-metal hole saw with a 38mm maximum cutting depth, suitable for cutting wood, plastic and metal during electrical, plumbing and mechanical work.
52mm core drill with 150mm depth for concrete, brick, paving and block, supplied with a pilot drill, drift key and adaptors for different drill setups.
50mm masonry core drill with a pilot drill for making holes in brick and blocks for vent pipes and drainage, made from hardened and tempered steel.
170-piece HSS drill bit set covering 1mm to 10mm in 0.5mm increments, with 118° split point tips and extra quantities in common sizes for workshop and DIY drilling.
18+ ID check16pc Hole Saw Cutting Set Kit 19-127mm Wood Metal Alloys Heat treated teeth For hard and softwoods, plastic, plasterboard and non-ferrous metals. Contains 12 holesaws 19, 22, 29, 32, 38, 44, 51, 64, 78, 89, 102 and 127mm 6mm (1/4″) and 10mm (3/8″) arbors Reinforcing plate and hex key. In a robust storage case
Multi-buy set containing 1 x wire cup brush 75mm twist knot m14 rust paint removal and 1 x wire brush set 110mm twist knot. 75mm twist knot wire cup brush with M14 thread for removing rust, paint and heavy grime from metal surfaces during prep, cleaning and workshop jobs.
Wood hole saw set in 12 sizes from 19mm to 127mm, also suitable for plastic and thin sheet metal, with arbors, drill bit, hex key and extension plate.
4pc Kitchen Router Set One Straight Bit 63 x 12.7mm with 1/2″ shank Two Straight Bits 50 x 12.7 with 1/2″ shank One Flush Trim Bit 25.4 x 12.7 mm with 1/4″ shank TCT tipped Stored in a wooden storage box with tilt for easy access
305mm TCT blade with 120 teeth, a 25.4mm bore and 2.4mm blade thickness for 12in mains-powered mitre saws, with a maximum speed of 4900rpm.
300mm diamond cutting disc with a turbo design, 20mm bore and maximum 100mm cutting depth, rated to 5100rpm for tiles, slabs and construction materials.
Keyless chuck adaptor with a 3-jaw design, 0.5-6.5mm bit capacity and 1/4in hex shank for fast bit changes on compatible drills and drivers.
16mm bi-metal hole saw with a 38mm maximum cutting depth, suitable for cutting wood, plastic and metal during electrical, plumbing and mechanical work.
Right angle drill attachment with 1.5-10mm capacity for drilling in corners and confined spaces. Suitable for hand or power drills with right or left hand use.
400mm laser welded diamond disc with 25.4mm bore and 145mm cutting depth, suitable for cutting steel, asphalt and concrete.
18+ ID check300W oscillating multi tool for cutting, scraping and sanding jobs, supplied with saw blade, scraper and 3 sanding sheets for quick mains-powered setup.
Drill bits, power tools and power tool accessories for drilling, cutting, grinding and finishing. The drilling side covers wood drills, flat spade bits, auger and Forstner bits, HSS and cobalt metal drill bits, masonry and SDS bits, step drills, countersinks and assorted sets, with hole saws and core drills for larger holes, plus chucks, bit holders and drill accessories.
Power tools include angle grinders, impact wrenches, saws, sanders, heat guns and mixers. For consumables there are cutting blades and discs, diamond blades, grinding discs, wire cups and brushes, sanding and polishing accessories and rotary accessories. Spare Parts & Chargers holds batteries, chargers and replacement parts for cordless tools, chainsaws, generators and pressure washers.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy