Dori Block 51mm x 50mm Double Pinned Aluminium Brick Gauge
CT6616 £12.99 inc. VAT In stock · Free deliveryDouble pinned aluminium Dori block for making a 51mm x 50mm brick gauge, fitting 40mm, 50mm and 50.8mm steel or aluminium profiles.
Bricklaying tools cover laying mortar, setting out walls, shaping joints and carrying out masonry repairs, with trowels, jointers, lines, hammers and chisels in the range. Choose working sizes and handle types for the task, then match profile fittings and jointing tools to the dimensions involved.
Showing 49–72 of 88 resultsSorted by popularity

Double pinned aluminium Dori block for making a 51mm x 50mm brick gauge, fitting 40mm, 50mm and 50.8mm steel or aluminium profiles.

250mm / 10in bricklaying pointing trowel with a polished blade, wooden handle and industrial welds for repointing, mortar application and masonry repairs.

12in 300mm bricklaying profile clamp in zinc plated steel, supplied with a T-bolt screw and 80mm thread for securing profiles during wall setup.

Pair of adjustable cast aluminium stretchers for brick lines, clamping onto 4in to 12in blocks to keep building lines straight during bricklaying and blockwork.

48mm x 60m laminated waterproof gauge tape with brick and block markings for building profiles, helping keep bricklaying set out clear and consistent on site.

33m brick gauge tape for marking building profiles at 75mm, 150mm and 225mm. Laminated waterproof finish for clear, consistent brick and block course setting out.

130mm internal profile clamp with steel zinc plated body, 40 x 40mm eye and T bolt thumb screw for box section, frame assembly and profile work.

Pack of 4 external brick line holder clips for 50mm x 50mm profiles. Fits Blakes, PT Profiles and Taylor Tools for brickwork setting out.

Lightweight profile block dolly for bricklaying setups using 50mm x 50mm box section, with a 450mm x 450mm frame and 6mm tightening bracket.

Bricklaying profile clamp for full and double brickwork, holding 50.5mm to 60mm profiles steady on walls with a cavity width of up to 110mm.

4-piece 19mm top clamp set for double brick runs and internal corner bricklaying profiles, with zinc plated parts for quicker on-site setup.

Adjustable 19mm veneer top profile clamp set with zinc plated finish, supplied with G-clamp, 90° L-bracket and two nail-on brackets for profile setup work.

Replacement top clamp L-bracket for 19mm top clamp setups, with listed dimensions of 750 x 290 for checking against worn, bent or missing parts.

19mm top clamp G bracket for internal full brick clamp setups. A zinc plated replacement part for restoring worn, damaged or incomplete clamp assemblies.

19mm top clamp G-bracket replacement part with a zinc plated finish, useful for replacing worn, damaged or missing clamp brackets and keeping tools in use.

19mm top clamp nail bracket replacement with zinc plated finish. Suits TOP style clamp setups and helps keep existing clamps working properly.

450mm bricklaying profile clamp for external corners, made from zinc plated steel with 4 masonry nails and holes for fixing through perp joints.

440mm external profile clamp in zinc plated steel for bricklaying setup. Fits one block or two bricks for secure profile positioning on site.

Internal half brick profile clamp for bricklaying setup, with a 103mm clamp length, 80mm bar thread and zinc plated steel construction.

103mm external profile clamp for half-brick bricklaying work, made from zinc plated steel with an 80mm threaded bar for secure profile positioning.

Small profiling trowel with leaf and square blades, suited to fine pointing, patch repairs and neat brickwork finishing in tight joints and awkward areas.

Adjustable D type brick tongs for carrying 6 to 10 bricks at a time, with automatic clamping jaws and a 400-670mm opening for quicker site handling.

Solid steel zinc plated mortar spike for securing internal profiles in perp joints during bricklaying and block work, helping keep profiles steady on site.

300mm / 12in internal profile clamp in solid steel with a zinc plated finish and 80mm T-bolt screw for holding bricklaying profiles during building work.
Bricklaying tools cover mortar preparation, laying, setting out and joint finishing. Choose an 11 inch brick trowel, a pointing trowel in 4in, 5in, 6in or 10in, a 7in gauging trowel or a 6in or 7in bucket trowel. Jointing choices include a 13mm/16mm double-ended brick jointer, sled tools in 10mm, 12mm, 16mm or 19mm, and a four-barrel set from 1/2in to 7/8in. Setting-out equipment includes brick line in lengths from 18m to 150m, line pins, corner line blocks and steel profile clamps in internal, external and nail-on styles. Dori blocks position the line, while gauge tape marks out courses. For masonry work, choose a bolster chisel with a 60mm, 75mm or 100mm blade, a 600g brick hammer or a 22oz scutch hammer with 36mm combs. Adjustable brick tongs carry 6 to 10 bricks, while a 265mm fluted plugging chisel removes old mortar before repointing.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use Analytics cookies to understand how the website is used and which visits lead to orders. If you accept Marketing cookies, tools from Google, Meta (Facebook and Instagram) and Microsoft (Bing) help us measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy