Threading Tools

9-piece axle spindle rethreading set for cleaning and repairing damaged axle, spindle and wheel stud threads, with metric and UNEF dies plus 27mm drive bar.

M18 x 1.5 spark plug rethread tool for cleaning and repairing damaged internal threads, also suited to drain plug and O2 sensor fittings, with 90mm reach.

Glow plug rethreading tool for cleaning and re-cutting M12 x 1.25 threads, with a 270mm length, centring shaft and eccentric function for recessed access.

M12 x 1.25 glow plug thread repair tool with 140mm reach, eccentric function, centre shaft and hex drive for cleaning and re-cutting damaged threads.

7-piece spark plug thread repair tool set also covering glow plug threads, with varied reach and a centring shaft for cleaning and re-cutting damaged threads.

5-piece tap and die holder set for M3 to M12 thread cutting and thread repair, with 72 tooth reversible ratchet, T-bar, tap holder and 3mm hex key.

38mm die holder for M12 to M15 round dies with 1/2in square drive and 25mm hex, giving a practical way to hold dies securely for threading and repair work.

Compact 20mm die holder for M3 to M6 round dies, with 3/8in square drive and 21mm hex for thread cutting and repair in tighter spaces.

10-piece multi-spline broken screw extractor set for removing damaged studs, screws, pipes and grease nipples, used with a 13mm socket or wrench.

Commercial wheel stud nut thread repair kit for cleaning or restoring damaged wheel nut threads, with M18, M20, M22 and 7/8 x 11BSF dies plus 32mm adaptor.

Compact tap wrench for M5 to M10 taps with a reversible ratchet T-bar design, suited to hand threading and thread repair where access is limited.

HSS taper pipe reamer covering 10-34mm for removing burrs from pipe, tube and holes after cutting or drilling, including electrical conduit tube.