Threaded Cap Puller 12pc Slide Hammer Set M10 M14x1.5 700g
CT6684 £51.99 inc. VAT In stock · Free delivery12-piece threaded cap puller kit with 700g slide hammer, 9 thread adaptors and M10/M14 connecting nuts for removing stubborn threaded caps.
Special application tools for mechanics working on particular vehicle components, including air conditioning, alternator pulley, belt tensioner and shaft tools. Browse removal, fitting and alignment kits by their stated purpose, comparing vehicle and engine applications, fastener profiles and supplied adaptors to match the service job.
Showing 313–336 of 457 resultsSorted by popularity

12-piece threaded cap puller kit with 700g slide hammer, 9 thread adaptors and M10/M14 connecting nuts for removing stubborn threaded caps.

10-piece slide hammer puller set with a 290mm rod, M12 connections and adaptor fittings for removing tight bearings, gears and shafts in garage or workshop use.

13mm top mount tool with 3/8in drive for VW, Audi, SEAT and Skoda VAG suspension strut nuts. Flexible design helps with awkward access during removal.

AdBlue tank cap remover for Peugeot and Citroen PSA vehicles, used with a 3/8in drive or 17mm spanner for seized cap removal and refitting.

Radar sensor positioning tool for selected Volvo models, used during ADAS calibration to align the front radar sensor accurately with OEM 9997407 equivalent fitment.

Camera positioner for Volvo PAC calibration work, made from aluminium with an acrylic spirit level for accurate parking assistance camera setup.

Axle extractor for BPW former 16 ton outer thread wheel axles. M125 x 2.0 fitment for correct removal work using 49mm and 30mm spanners.

12V smoke leak detector for finding leaks in EVAP systems, air intakes and radiator pipes on cars and motorcycles, with built-in air pump and adjustable flow.

Wiper puller with a 24mm claw opening and 32mm extraction depth for controlled removal of seized wiper arms on compatible vehicles.

Stretch belt installation tool for water pump belts on compatible 1.0L and 1.2L 3-cylinder engines, equivalent to OEM 0109-1B and EN-52112-2.

Universal radiator pressure tester and coolant vacuum refill kit for cooling system leak checks, with adjustable adaptor and colour coded caps for mixed vehicle work.

Heavy duty universal joint puller for cardan shafts on commercial vehicles, with 65mm opening, 55mm clamping height and 32mm hex drive.

32mm ball joint remover with 70mm housing opening and 26mm hex drive for separating stubborn joints on cars, light trucks and SUVs.

Stretch belt tool for fitting A/C belts where no tensioner is fitted, covering N62 V8 applications from 2004-2006 and W17 diesel engines.

Roof grab handle release tool for VW, Seat and Skoda models. Helps remove interior grab handles cleanly with less risk of marking trim or clips.

Audi and VW door handle removal tool for compatible handles without a cylinder lock, reaching the locking hook behind the handle in place of OEM T10539.

170mm VW door handle removal tool for exterior handle jobs, used to loosen the locking hook on handles without a locking cylinder.

Valve tappet adjuster tool kit for motorcycles, ATVs and ATCs with screw type adjusters. Includes 8, 9 and 10mm offset spanners plus square and slotted adjusters.

Adjustable 35-45mm motorcycle fork seal driver with a split design for installing seals and bushings squarely during servicing and rebuild work.

15-piece valve spring compressor kit for air-assisted engine servicing without cylinder head removal, using a 3/8in drive T-handle or ratchet.

7-piece slotted sensor socket set for wired temperature sensors and thermo switches, with 3/8in and 1/2in drive sizes for awkward access jobs.

9-piece car cleaning set with microfibre cloths, wash mitt, sponge, pads and wheel brush for washing, drying and waxing, supplied in a transparent storage bag.

Rear axle bush tool kit for Fiat Stilo, Bravo and Lancia Delta, used for installing the rubber bushes and silent block mounts during repair work.

Chrome-molybdenum ball joint separator with a 39mm fork opening, 80mm housing opening and 26mm hex drive for HGV and commercial vehicle repairs.
Ball joint splitter and remover sets, suspension bush tools and specialist engine tools, many made for VW, Audi and other VAG models, BMW, Ford and Mercedes. Suspension and steering tools include ball joint presses, inner tie rod tool kits, subframe bush tools, strut nut sockets and steering wheel pullers. For engine work there are valve spring compressor and piston ring compressor sets, engine and diesel compression tester kits and oil seal kits.
Diesel engine tools cover glow plug removal tool kits, glow plug sockets and reamers, injector pullers and an injector seat cutter set, plus lambda sensor socket sets. Cooling and air conditioning tools include coolant pressure tester kits, vacuum refill kits and an R134A manifold gauge set, alongside stretch belt tool sets, alternator pulley tools and motorcycle tools such as a flywheel puller set and chain breakers. Check the make and engine named on each tool before ordering.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy