Air Belt Sander 10mm x 330mm Pneumatic with 3 Belts

A compact air belt sander for sanding, smoothing and cleaning up smaller areas where a larger machine is harder to control. The narrow 10mm belt makes it useful for edges, tight sections and awkward spots that need better access.

Used across garages, workshops, fabrication work and general repairs, this pneumatic sander suits jobs such as weld clean-up, smoothing metal edges and tidying detailed sections. A 10mm belt sander is a practical option when working on smaller parts or narrow areas where a belt gives better reach than a disc. For regular vehicle maintenance, metalwork and bench work, it helps with controlled material removal without needing a larger sander.

Running at a free speed of 16000rpm, it is suited to steady sanding work with an air setup. The tool operates at 90psi, with 6cfm air consumption, and uses a 1/4in BSP air inlet with a 3/8in air hose. Supplied with three 10 x 330mm sanding belts in 60, 80 and 120 grit, it gives you coarse, medium and finer options straight away for different stages of the job. The narrow belt size helps when access is limited, while the included grit range makes it useful for regular workshop use without needing to source belts separately before getting started.

Pneumatic belt sander specifications

• Belt size: Takes 10 x 330mm sanding belts for narrow-area sanding and edge work.
• Speed: Free speed of 16000rpm for controlled sanding and clean-up tasks.
• Air requirement: Runs at 70-90psi (90psi maximum) with air consumption of 6cfm.
• Fitment: Fitted with a 1/4in BSP air inlet and suited to a 3/8in air hose.
• Contents: Supplied with 3 sanding belts in 60, 80 and 120 grit.
• Contents: The three air belt sander belts measure 10 x 330mm and cover 60, 80 and 120 grit.

A practical choice for regular maintenance, fabrication and small repair work.