Bilge Pump 1000GPH 12V Marine Submersible for Boats Yachts

A 12V bilge pump built for removing unwanted water from boats and yachts. With a 1000GPH open flow rating, this submersible marine pump is suited to general bilge drainage where dependable water removal is needed on board.

Used for clearing bilge water in smaller marine craft, it suits routine boat maintenance, general drainage jobs and keeping low areas of the hull from collecting excess water. Handy for owners carrying out regular checks, servicing and clean-up work, it can also handle water containing floating waste, which makes it practical for everyday marine use rather than clean-water-only applications.

This 12V pump has a 5.5A current draw and a 7A fuse requirement. A 28.5mm outlet diameter gives you the key connection size to check against your existing hose setup before fitting. The positive cord seal helps protect the cable entry point, while the removable pump base gives easier access for cleaning after use. That is especially useful where debris, residue or floating waste may build up over time, helping keep the pump ready for repeated use through the season.

12V water pump specifications

• Flow rate: 1000GPH open flow rating for bilge water removal.
• Power supply: 12V operation with 5.5A current draw.
• Fuse requirement: Uses a 7A fuse.
• Outlet size: 28.5mm outlet diameter for hose connection checks before installation.
• Maintenance: Removable base allows easier access for cleaning, with a positive cord seal and suitability for pumping water with floating waste.
• Minimum water depth: 1/8in.
• Maximum water temperature: 77°F.

A practical 12 volt submersible pump for regular boat drainage, cleaning and maintenance work.