Core Drill Bit 200mm Masonry Cutter 150mm Depth & Adaptors

A 200mm core drill bit for cutting large openings through common building materials where a standard masonry bit is not suitable. Built for bigger diameter work in brick, block, concrete, asphalt and limestone, it comes supplied with a pilot drill, drift key, plus hex and SDS adaptors for setup.

Used for making clean, wide holes for pipe runs, ducting, vents and similar service openings, this type of masonry cutter is a practical choice for site work, renovation jobs and general trade use. Builders, plumbers, electricians and maintenance trades will find it useful when working on walls, floors and other solid surfaces where larger access holes are needed. It suits regular construction and fitting work where changing between separate accessories can slow the job down.

The 200mm diameter makes it suitable for larger cut-outs, while the 150mm drilling depth gives useful reach for many routine applications in masonry and concrete-based materials. Four cutting segments are fitted to help the cutter work into tougher surfaces, and the included pilot drill helps guide the hole as you start. Supplied with both hex and SDS adaptors, it gives added flexibility depending on the drill setup being used, while the drift key is included for practical assembly and removal. Having the main accessories in the set helps keep the job straightforward when preparing for repeated site or workshop use.

Masonry core drill bit specifications

• Diameter: 200mm core size for larger holes in masonry and building materials.
• Drilling depth: 150mm core length for deeper cutting on common site jobs.
• Application: Suitable for brick, block, concrete, asphalt and limestone.
• Contents: Supplied with pilot drill, drift key, hex adaptor and SDS adaptor.
• Cutting design: Fitted with 4 cutting segments for working into tougher surfaces.

A practical choice for regular building, fitting and maintenance work.