Drum Pump Electric Telescopic for Diesel & Light Oil

A practical electric drum pump for transferring diesel and light oil from drums and larger tanks with less mess and less effort than manual pouring. Supplied with a 2m hose, manual dispensing nozzle and telescopic suction tube, it is suited to regular fluid transfer where clean handling matters.

Used for moving diesel fuel or light oils such as engine oil from workshop drums, storage containers and IBC tanks into machinery, vehicles or smaller containers. Handy for garage work, farm use, servicing areas and general maintenance where fuel or oil needs to be dispensed in a controlled way. The manual nozzle helps with directed filling, while the electric operation makes repeated transfer jobs easier when working through larger volumes.

The telescopic suction tube extends from 850mm to 1245mm, giving this diesel drum pump flexibility for different container depths. It is suitable for 45 gallon and 205 litre drums as well as 220 to 275 gallon IBC tanks from 1000 to 1250 litres. A flow rate of 18.4 litres per minute helps keep transfer work moving without being awkward to control. The compact lightweight build makes it easier to handle and position, while the on/off switch and LED indicator keep operation straightforward. Supplied with both a 230V AC adaptor and 12V battery clips, it gives you useful power options depending on where the pump is being used. The silent motor also helps keep noise down during regular workshop or site use.

Drum pump specifications

• Flow rate: Pumps at 18.4 litres per minute for steady diesel or light oil transfer.
• Tube range: Telescopic suction tube adjusts from 850mm to 1245mm.
• Contents: Includes 2m hose, manual dispensing nozzle, 230V AC adaptor and 12V battery clips.
• Application: Suitable for 45G and 205L drums plus 1000 to 1250L IBC tanks.
• Handling: Compact lightweight construction with on/off switch, LED indicator and silent motor.
• Power: The 12V diesel pump is supplied with battery clips and a 230V AC adaptor.
• DC power cable: 4m with crocodile clips.
• Motor: 5 pole DC brush motor, fuse protected.
• Duty cycle: 15 minutes on, 15 minutes off.
• Operating temperature: 5 to 40°C (41 to 104°F).
• Maximum viscosity: 100 cSt.
• Nozzle spout: 3/4in (19mm) outside diameter, stainless steel.
• Bung adaptor: Built-in 2in adaptor with 15mm adjustment, plus a 2in to 2.5in x 5mm buttress thread converter.
• Parts in contact with the fluid: Viton, POM, stainless steel, PE, NBR and PP.
• Not suitable for: Petrol, corrosive chemicals or lacquer thinners.

A straightforward electric diesel pump for keeping fuel and light oil transfer cleaner and easier to manage.