Masonry Core Drill 127mm 150mm SDS Adaptor & Pilot Drill

A masonry core drill for cutting clean, round 127mm holes in brick and similar masonry where a standard drill bit is not suitable. The 150mm barrel depth gives useful reach for deeper wall sections, while the included pilot drill and SDS adaptor provide the main parts needed to get set up.

Used for making larger openings for pipe runs, vents, cable access and similar wall penetrations, this type of hole cutter suits trade and site work as well as heavier renovation jobs. Builders, plumbers, electricians and general installers commonly use a core bit like this when a neat, consistent hole size is needed through masonry during fitting, servicing or alteration work.

The 5-segment cutting end is suited to wider drilling jobs where controlled cutting matters, and the pilot drill helps guide the bit at the start so it is easier to position before the core begins to cut. With a 127mm diameter and 150mm drilling depth, it covers a useful size for larger wall openings without needing to piece together separate accessories. The included SDS adaptor is a practical addition for compatible setups and helps keep the bit ready for regular site or workshop preparation work.

Masonry core drill bit specifications

• Diameter: 127mm core size for larger round holes in masonry.
• Depth: 150mm barrel depth gives useful reach through thicker sections.
• Cutting head: 5-segment end suited to heavier drilling applications.
• Contents: Supplied with pilot drill for easier starting and positioning.
• Fitment: Includes SDS adaptor so the main setup parts are supplied together.

A practical SDS core drill for larger masonry drilling and wall access work.