Paint Spray Gun 0.8mm Mini Gravity Feed Stainless Steel

A small spray paint gun for jobs where control and accuracy matter. The 0.8mm setup, gravity feed design and stainless steel nozzle and needle make it a practical choice for touch-in work, small panels and detail spraying.

Used for vehicle touch-ups, small repair areas, model work, workshop spraying and other jobs where a full-size gun would be too bulky. The mini format suits garage work, bodyshop use and careful DIY repairs, especially when applying paint to tighter sections or smaller surfaces that need a more controlled spray pattern.

Built with high atomisation and low nozzle air pressure, it is suited to achieving a finer spray on smaller jobs while keeping the gun manageable in the hand. The gravity feed cup has a 120cc capacity, which is useful when working on localised repairs without overfilling for short runs. A stainless steel nozzle and needle help with repeated use and cleaning after paint application, while the 1/4in air inlet fits common air line setups. Operating pressure is 30 to 50 psi, with air consumption rated at 2 to 8 cfm, and a 2 to 3 HP compressor is required. That makes it a sensible option for regular small-area spraying where a compact gun is easier to handle and store between jobs.

Paint spray gun specifications

• Nozzle size: 0.8mm setup suited to detail spraying, touch-in work and smaller painted areas.
• Feed type: Gravity feed spray gun with 120cc cup for short spraying runs and controlled paint use.
• Material: Stainless steel nozzle and needle for durability and easier cleaning after use.

Gravity feed paint gun air requirements

• Air supply: 1/4in air inlet with 30 to 50 psi operating pressure and 2 to 8 cfm air consumption.
• Compressor requirement: Suitable for use with a 2 to 3 HP compressor.

A practical choice for regular small-panel, touch-up and detailed spray work.