Tyre Changer 45in Max Wheel Diameter 230V Pneumatic Assist

A 230V car tyre changer built for workshop use on passenger vehicle and light commercial vehicle wheels. This tyre changer combines pneumatic assist, a tilting column and tubeless tyre inflation to help with fitting and removing standard, low-profile and run-flat tyres.

Used for tyre fitting, removal and servicing work in busy garages, tyre bays and vehicle maintenance workshops, it is suited to jobs where extra control is needed around stiff sidewalls and tighter bead areas. The assist arms and bead handling functions help when working on EMT, high-performance and low-profile tyres, making it a practical option for regular wheel and tyre work on modern vehicles.

The machine has a maximum wheel diameter of 45in and handles wheel widths up to 14in, with outside clamping from 12in to 23in and inside clamping from 14in to 26in. Pneumatic-powered upper and lower bead support helps hold the bead in the wheel drop during mounting and demounting, which is especially useful when dealing with awkward tyres that tend to reseat. A 1.1kW motor, 230V/50Hz power supply and 8 to 10 bar air requirement make it suitable for established workshop setups, while the bead breaker delivers around 2500kg of force. The pedal-controlled inflator and adjustable bead breaker add further control during day-to-day use, helping keep tyre fitting work more straightforward and consistent.

Tyre changer specifications

• Power supply: 230V / 50Hz with 1.1kW motor for workshop installation.
• Wheel capacity: Handles wheels up to 1140mm (45in) in diameter and up to 355mm (14in) wide.
• Clamping range: Outside clamping 12in-23in and inside clamping 14in-26in.
• Assist system: Pneumatically operated tilting column with right help arm, pneumatic-powered upper disc and lower lifting arm.
• Application: Suitable for standard, low-profile, run-flat and light commercial vehicle wheels.
• Air supply: 8 to 10 bar (approx.).
• Bead breaker: Adjustable, with approx. 2500kg of force.
• Inflation: Pedal-controlled inflator with tubeless tyre inflation system.
• Build: Large main body and turning table.
• Noise level: Below 70dB.
• Dimensions: 1100 x 1050 x 2000mm (width x depth x height).
• Working temperature: -40 to 45°C.
• Storage temperature: -40 to 55°C.
• Operating humidity: 30 to 95%.

A practical car and light commercial tyre changer for regular tyre fitting and workshop servicing work.