Water Pump 3in 80mm Petrol Self Priming 30m3/h 15m Head

A 3in petrol water pump built for shifting larger volumes of water where mains-powered equipment is not practical. This self-priming transfer pump is suited to drainage, irrigation and general site work, with an 80mm port size, 30m3/h rated capacity and 15m total head.

Used where water needs moving quickly, it suits farms, gardens, building sites and temporary flood clearing jobs. Tradespeople, landowners and contractors can use it for drainage work, transferring water between areas, or supporting irrigation where a portable petrol-driven pump makes more sense than electric equipment. The higher-flow 3in inlet and outlet size makes it a practical choice when smaller pumps would be too slow for the job.

Powered by a KG200W engine with recoil start, the pump runs at 3600rpm and is built with fuel economy in mind. The alloy frame helps keep weight more manageable at 28kg, which is useful when the pump needs moving around site or loading in and out of a vehicle. Reinforced main parts are intended to improve wear and corrosion resistance during regular use, while the inside casing can be cleaned by removing a few bolts, making routine maintenance more straightforward. With a maximum suction head of 8.0m and a self-priming time of 120 seconds at 4m, it covers the key performance details buyers often need before choosing a pump for repeated transfer work.

Water pump specifications

• Capacity: Rated water flow of 30.0m3/h for faster transfer in higher-volume jobs.
• Head height: 15m rated total head for moving water across a useful working range.
• Port size: 80mm (3in) suction and discharge ports for higher-flow applications.
• Engine: KG200W petrol engine with recoil start, running at 3600rpm.
• Handling: Alloy frame, 28kg net weight and 510 x 432 x 415mm overall size.
• Model: KGP30.
• Noise level: 74.0dB(A) at 7m.
• Fuel consumption: 395g/kW.h.

A practical choice when you need reliable, portable water transfer on site, on land or around the property.