Welding Helmet Auto Darkening Arc TIG MIG Grinding Mode

A welding helmet with auto darkening filter for Arc, TIG and MIG work, with an added grinding mode for jobs that switch between welding and prep. The 100 x 60mm viewing area gives a clear working view while the filter reacts automatically as you strike an arc.

Used for garage fabrication, workshop repairs, vehicle maintenance and general metalworking, this helmet suits anyone carrying out regular welding jobs and occasional grinding in the same work area. It helps when moving between tack welds, longer runs and prep work, without needing to keep lifting the mask or swap to separate face protection for every stage. For DIY users and trade work alike, the adjustable settings make it easier to suit different welding conditions and light levels.

The auto darkening filter has a fast 1/25000 second switching time, along with dark shade settings from 9 to 13. Sensitivity control offers 4 grades, and the dark-to-light delay can be set at 0.1s, 0.6s or 1s depending on how quickly you want the lens to return after welding stops. Two sensors support arc detection, while the power supply uses solar cells with 2 replaceable CR2450 lithium batteries as backup. The filter size is 114 x 133 x 11mm. Taken together, the range of settings makes it a practical option for regular workshop use where conditions can vary from job to job.

Welding helmet auto darkening arc specifications

• Viewing area: 100 x 60mm for a clear forward working view.
• Filter size: 114 x 133 x 11mm auto darkening filter assembly.
• Switching time: Fast 1/25000s reaction when the arc is struck.
• Shade range: Dark settings 9, 10, 11, 12 and 13 with grinding mode included.
• Power supply: Solar powered with 2 replaceable CR2450 lithium batteries and 2 sensors.
• Power and sensors: This TIG mask uses solar power with two replaceable CR2450 lithium batteries and two sensors.

A practical choice for regular welding, fabrication and repair work.