Wishbone Lever Tool 65-265mm Chain Head Suspension Arm Bar

A wishbone lever tool used to lower the suspension arm and hold it in the retracted position while work is carried out. It gives controlled leverage during dismantling and refitting jobs, with an adjustable clamping height from 65mm to 265mm to suit a range of setups.

Used for vehicle maintenance in garages and workshops, this tool is especially handy when replacing wheel bearings or carrying out strut and drive shaft repairs. The chain head helps keep the arm pulled down so there is less strain during assembly, making access easier when working around tight suspension components. It is a practical option for mechanics and experienced DIY users dealing with front suspension work where safe control of the wishbone is important.

The low-height design helps with quicker fitting in confined areas, while the long bar gives extra reach and leverage when pulling the arm down. Maximum traction is rated at 500kg, and the chain length including hook is approximately 660mm. By holding the suspension arm in position, it also helps reduce the chance of damage to ball joints and drive shaft sleeves during repair work. For regular servicing and suspension jobs, that makes it a useful tool to keep close at hand.

Wishbone lever tool specifications

• Clamping range: Adjustable from 65mm to 265mm for different suspension arm positions.
• Total length: Hooked overall length is 1030mm for added leverage and working reach.
• Chain head: Chain length including hook is approximately 660mm to pull and retain the arm.
• Function: Lowers the wishbone and holds it in the retracted position during repair work.
• Use: Handy for wheel bearing replacement, strut repairs and drive shaft work.

A practical choice for regular suspension and driveline repair work.