Showing 1561–1584 of 6742 resultsSorted by popularity
Crankshaft locking pin M14 x 1.5 for Audi FSI engine timing work. Used to hold the crankshaft at TDC during timing belt replacement and servicing.
Fuel pump sprocket remover for Hyundai and Kia chain drive CRD diesel engines, covering 1.1 to 1.7 litre models for timing and fuel system work.
Compact 100mm adjustable wrench with an adjustable jaw for small nuts and bolts, suited to garage work, home maintenance and DIY repairs.
1/2in drive suspension joint pin nut socket for selected Citroen and Peugeot models, used on castellated suspension joint nuts during front suspension servicing.
5-piece strut socket set for holding damper shafts during strut nut removal and refitting, used with a 22mm spanner or socket on compatible vehicles.
1/4in socket adapter for use with a 10mm ratchet spanner, giving a low profile drive option for tight access mechanical, garage and workshop jobs.
Rechargeable red LED warning light set with wireless operation and magnetic bases, suitable for recovery vehicles, breakdown use, trucks and agricultural vehicles.
18mm deep socket with 1/2in drive for recessed fixings and longer studs, providing added reach during garage servicing, workshop repairs and maintenance.
Red rear triangle reflector with screw-fit fixing for trailers, caravans, RVs and gateposts. A practical warning marker for visible rear marking outdoors.
Oil filter removal wrench with a wide adjustable band for 76-98mm screw-on filters, a 90 degree swivel head and vinyl handle for confined spaces.
Replacement pull cord starter spare part to fit the Neilsen Ground Auger CT2293, useful for restoring reliable starting on a worn or damaged machine.
18+ ID checkWindscreen wiper blade cutter for trimming worn rubber edges, supplied with a cleaning sponge for preparation and usable twice per blade.
Insulated PH2 screwdriver with a 100mm blade, rated to 1000V AC and manufactured to IEC 60900 for work on electrical sockets, switches and fittings.
18+ ID check165mm jab saw for cutting drywall and plasterboard, with a pointed tip for piercing boards, sharp teeth and a soft grip handle for controlled use.
90 x 165mm woodworking sanding block with a plastic body, foam pad and clamping mechanism, supplied with 5 sanding sheets for paint prep, filler work and bare wood.
12-piece thread repair set for wheel nuts, bolts and studs, covering M12 x 1.25, M12 x 1.5 and M14 x 1.5 with taps, dies, holders and a thread gauge.
Set of 6 precision files, each 140mm long, with flat, tapered, square, triangle, half round and round profiles for jewellery, modelling and fine finishing.
30mm impact socket with 3/4in drive for compatible impact wrenches, useful for garage, workshop, servicing and general repair work.
400-piece assortment of blind pop rivets with aluminium bodies, steel pins and dome heads in four sizes for fastening sheet materials during repairs.
38in towed grass sweeper with a 12 cu ft hopper and 250mm brush, for collecting leaves and clippings behind compatible mowers or garden tractors.
1/2in drive torque angle gauge for tightening head bolts and other critical fasteners to a specified angle after torque has been reached.
14mm injector socket with a 1/2in square drive, open 12-point design and 119mm length for reaching fuel line fittings on compatible common rail engines.
Heavy duty wooden replacement handle for compatible pick axe and mattock heads. A practical way to replace a worn shaft for garden, site and landscaping work.
Magnetic 3/8in drive socket rail for storing up to 10 metric or standard sockets neatly, with quick access for garage, workshop, van or home use.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy