Dirty Water Pump 400W Submersible 230V 8m Cable

A 400W submersible dirty water pump for shifting water where a standard clean-water pump may struggle. Running on a 230V mains supply, it is a practical option for general drainage work around the home, workshop or site.

Used for clearing flooded areas, draining pits, and moving water from tanks or similar spaces where debris may be present, this submersible water pump suits both domestic and trade jobs. It is a sensible choice for property maintenance, site work, workshop use and home maintenance when water needs removing quickly without relying on buckets or other manual methods. For garages, outbuildings and low areas that collect water, it gives a straightforward way to deal with everyday drainage problems.

The 8 metre cable gives useful reach from the nearest power source, which can make a difference when access is awkward or the pump needs to be lowered into a harder-to-reach area. A 5 metre maximum delivery head and 5 metre submersion depth help cover a wide range of routine pumping tasks, while the stated capacity of up to 7500 litres per hour makes it suitable for general water removal work. Because it is intended for dirty water applications, it is better suited to drainage jobs than a clean-water-only pump. That makes it a useful piece of kit to keep nearby for regular maintenance and unexpected water clearance.

Dirty water pump specifications

• Power: 400W electric motor on a 230V / 50Hz mains supply.
• Cable length: 8 metre cable for added reach from the socket.
• Delivery head: Maximum pumping height of 5 metres.
• Submersion: Suitable for use at depths up to 5 metres.
• Capacity: Maximum delivery rate of 7500 litres per hour.
• Float switch: Starts the pump at a minimum water level of 50cm.
• Minimum suction level: 5cm.
• Maximum particle size: 35mm.
• Pipe connection sizes: 1in, G1in, 1.25in and G1.5in.
• Maximum water temperature: 35°C.

A practical choice for regular drainage and water-clearing jobs.