Showing 6289–6312 of 6412 resultsSorted by popularity
-

CT3517
£35.99 inc. VAT
Out of stockSuspension bush removal and installation tool for VAG VW, Seat and Skoda front lower wishbone rear bushes, allowing in-situ servicing without removing the aluminium housing.
-

CT1015
£488.49 inc. VAT
Out of stock20 ton workshop hydraulic press with a floor standing H-frame, 160mm stroke and 0-998mm work range for pressing, bending and straightening tasks.
-

CT4651
£59.99 inc. VAT
Out of stockEA211 timing tool kit for compatible 1.0, 1.2 and 1.4 petrol engines, covering specified 3 and 4 cylinder applications with matching OEM tool references.
-

CT5204
£9.49 inc. VAT
Out of stockUniversal clutch alignment tool for single plate clutches with 3 collets, helping centre the clutch plate for easier gearbox refitting on many vehicles.
-

CT3572
£96.49 inc. VAT
Out of stock37-piece wheel bearing and oil seal installation kit with 34 nylon drifts, 3 metal sleeves and dead blow hammer for fitting bearings and seals cleanly.
-

CT4424
£79.99 inc. VAT
Out of stockTiming belt tool kit for selected 1.2 and 1.4 belt drive petrol engines, used for camshaft locking, crankshaft replacement and timing belt service work.
-

CT3953
£41.49 inc. VAT
Out of stockAlternator belt tool kit for installing and removing elastic drive belts, with 32mm, 45mm and 50mm installers, a belt remover and M8 fixing screws.
-

CT4647
£41.99 inc. VAT
Out of stockJaguar 2.0 timing tool kit for Si4 204PT petrol engines, also covering Land Rover models, for timing chain service and engine timing work.
-

CT3590
£26.49 inc. VAT
Out of stockAudi and VW timing tool kit for VAG 2.4 and 3.2 FSI V6, V8 and V10 chain-driven engines, used for camshaft timing checks and locking work.
-

CT4882
£83.49 inc. VAT
Out of stockTiming locking tool kit for compatible 3.6L 368DT diesel engines, with camshaft alignment blocks, a flywheel locking plate and crankshaft timing pin.
-

CT5434
£113.49 inc. VAT
Out of stock12V diesel pump for drums and IBC tanks, also suitable for light oil, with 18.4L/min flow, 850-1245mm telescopic tube, 2m hose and manual nozzle.
-

CT4411
£37.49 inc. VAT
Out of stockMercedes fuel pump sender unit lid wrench for M-Class W164 and R-Class W251, with 1/2in drive and 22-point slotted design for removing or refitting the lock ring.
-

CT3767
£113.49 inc. VAT
Out of stockCamshaft timing tool kit for Porsche Cayenne and Panamera V8 turbo and M97/01 engines, used for locking and aligning cams during engine servicing.
-

CT3765
£64.99 inc. VAT
Out of stockTiming chain tool kit for compatible V6 engines, with camshaft locking, crankshaft locking and turning tools for alignment, adjustment and chain replacement.
-

CT5225
£15.49 inc. VAT
Out of stockSpill-free cooling system filling funnel kit with clear funnel, lid, elbows, extension, caps and adapters for cleaner, more controlled coolant top-ups.
-

CT4068
£27.49 inc. VAT
Out of stock4-leg vehicle spring compressor for automatic gearbox clutch work, covering 64-175mm clutch diameters for rear clutch piston snap ring removal.
-

CT2577
£17.49 inc. VAT
Out of stock11-piece valve stem seal remover and installer kit with pliers, deep seal sockets, adaptors and handle for engine and cylinder head work.
-

CT4879
£28.99 inc. VAT
Out of stockTiming tool kit for Vauxhall, Opel, Saab and Chevrolet 2.0 and 2.4 twin cam petrol engines from 2008 to 2015, for timing chain service work.
-

CT2558
£9.99 inc. VAT
Out of stockAn 8 in 1 ring spanner with rotating heads, giving eight metric sizes on a single tool: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm and 19mm. Because the rotating heads carry all eight sizes, one spanner does the work of eight separate ones for nuts and bolts in these sizes. Ring spanner specifications Type: 8…
-

CT2785
£75.99 inc. VAT
Out of stockHeavy duty 75mm combination spanner with a long handle, open jaw and 12-point ring end for added leverage on large nuts and bolts.
-

CT0887
£10.99 inc. VAT
Out of stock1/2in drive flexi-head ratchet repair kit for CT0812, used to restore a worn or faulty ratchet mechanism and keep your existing tool in service.
-

CT0738
£27.49 inc. VAT
Out of stock1/2in drive ratchet torque wrench with a 28-210Nm range and reversible 45 tooth head for controlled tightening of wheel nuts, suspension bolts and fixings.
-

CT3700
£16.49 inc. VAT
Out of stock4-piece double-ended star spanner set in chrome vanadium steel, covering E6 to E24 for automotive servicing, mechanical repairs and maintenance.
-

CT5477
£122.99 inc. VAT
Out of stock25m cable reel with a 1m inlet lead, 13A mains supply and wall or ceiling mounting, supplied with a metal bracket and wall bolts for garages and workshops.