Air tools for workshop and vehicle tasks, including pneumatic grinders, blow guns, airbrush kits and air hammer equipment. Mechanics and workshop users can browse tool kits alongside hoses, gauges and compressor fittings, matching the tool and its connection requirements to their compressed air setup.
Showing 25–48 of 159 resultsSorted by popularity
Flexible air hose in reinforced rubber, 30ft long with 1/4in BSP brass ends, rated to 300 PSI working pressure for compressors, air tools and tyre inflation.
2-piece air hose coupler set with 1/4in hose barbs for compatible bayonet fittings, allowing quick connection changes on compressor and workshop air lines.
12-piece stainless steel air compressor hose fittings set with 1/4in and 3/8in BSP quick release connections for compressors and pneumatic tools.
1/2in drive air impact wrench with 230ft/lb torque, 7000rpm free speed, hammer clutch and 1/4in BSP inlet for garage and workshop fastening jobs.
High pressure spray gun kit with a 2 litre paint tank, regulator, air hose and paint hose. 1.8mm nozzle and 50psi maximum working pressure for workshop spraying.
Air hammer nut removal attachment with 190mm length for loosening seized rusty nuts, bolts and fasteners during garage, workshop and repair work.
Pneumatic spark cleaner for removing carbon from spark plugs by abrasive blasting, with silicon carbide media, 1/4in inlet and 6.2 bar operating pressure.
2-piece 1/2in BSP male bayonet airline fitting set for quick air hose connections on compressor, garage and workshop air lines.
30ft air compressor hose in flexible rubber, with 3/8in BSP brass connectors and a 300 PSI working pressure rating for garage, workshop and site use.
Air-powered injector puller set for removing seized diesel injectors, with vibration modes, adaptors, extension bars and claw fittings for common systems.
Pack of two stainless steel bayonet fittings with 3/8in BSP male threads for quick connection of compressors, air hoses and pneumatic equipment.
Multi fit air line coupler with 1/4 BSP female thread, quick release action and safety exhaust. Rated to 300 PSI for mixed compressor and air tool setups.
HVLP air spray gun kit with gravity feed, 1.4mm paint and 2.0mm primer nozzles, a 1000ml aluminium cup, regulator valve and gauge.
Heavy duty 265mm reciprocating air saw with an aluminium body, 9000 strokes per minute and rear exhaust for cutting panels, sheet metal and bodywork.
Air blow gun with 65mm and 205mm nozzles, a 1/4in BSP inlet, 8-10 bar working pressure and soft grip for cleaning car interiors, machinery and awkward areas.
Compact 50mm mini pneumatic air sander with variable speed, 15,000rpm and hook & loop pad for detailed sanding, bodywork prep and panel repair.
Compact 75mm pneumatic air sander with twin speed motor, 16000rpm free speed and 1/4in inlet for controlled surface prep on smaller panels and awkward areas.
Compact 3/8in drive air impact wrench with 102Nm torque, 9000rpm free speed, hammer clutch and 1/4in BSP inlet for garage and workshop use.
Compact 1/4in drive air ratchet tool with 90 PSI working pressure and a 1/4in BSP inlet for smaller nuts, bolts and lighter fastening in tight spaces.
Pneumatic air drill with 1/2in keyless chuck, reversible action and side handle for drilling, screwdriving, honing and reaming in workshop and garage use.
Pneumatic coolant vacuum refill tool with conical adaptor, 15L tanks and 2.7m hoses for quicker, cleaner coolant changes with less trapped air.
Dual head air paint spray gun with a 1.4mm nozzle and approximately 40cm spray pattern for broad coverage on bodyshop, panel and workshop paint jobs.
Brass air hose coupler and connector set with five 1/4 BSP Euro fittings: one female coupler, one female connector and three male quick connectors.
5-piece air chisel set for compatible air hammers including CT0676, with cutting, shaping and punch attachments for bodywork and exhaust repairs.
Air tools for workshop, bodywork and site jobs, run from a compressor. Die grinder and angle grinder models sit alongside 75mm air cut off tools and orbital, belt and straight line air sanders. An air hammer kit with needle descaler, chisel and drift sets, air drills, nibblers, shears and body saws handle metalwork, and each air nail gun is a coil, strip or palm nailer. You will also find several air blow gun styles, 90L and 220L sandblasting cabinet models and a 200L 3HP air compressor.
The sub-sections hold air impact wrenches from 3/8in to 1in drive, air ratchets in 1/4in, 3/8in and 1/2in drive, HVLP and gravity feed spray guns, and air lines and fittings, from hoses and hose reels to 1/4in, 3/8in and 1/2in BSP couplers. Check the air use of a tool against your compressor before buying.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy