Air tools for workshop and vehicle tasks, including pneumatic grinders, blow guns, airbrush kits and air hammer equipment. Mechanics and workshop users can browse tool kits alongside hoses, gauges and compressor fittings, matching the tool and its connection requirements to their compressed air setup.
Showing 97–120 of 159 resultsSorted by popularity
17-piece pneumatic grinder kit with a micro pencil tool, speed regulator, 10 grinder heads and a 1.5m air hose for detail grinding, polishing and cutting.
17-piece air wrench set with a 1/2in drive impact wrench, sockets and accessories, delivering up to 230ft/lb torque at a maximum air pressure of 90psi.
17-piece air line kit for compressor use, including blow gun, tyre chuck, pencil gauge, inflator needle, quick coupler and Euro fittings.
6in / 150mm air orbital sander with a 10000rpm free speed, built-in regulator and side exhaust for panel work, surface preparation and paint repairs.
Pack of two air line bayonet fittings with 1/4in BSP female connections and quick-connect couplers for compressors, hoses and air tools using matching fittings.
6-piece air blow gun kit with 3 extension nozzles, rubber tip and male tip for cleaning, drying and reaching tight spaces with compressed air.
Compact 1/2in drive air wrench set with 1424mm standard impact sockets, 17, 19 and 21mm deep sockets, a 75mm extension and case for garage and wheel work.
1/2in drive air ratchet tool with 265mm overall length, composite body, 75ft-lb torque and 180rpm free speed for workshop fastening and vehicle repairs.
1/2in air impact wrench with twin hammer clutch, composite body and 950 ft-lb max torque for garage, tyre fitting and workshop repair work.
Air tool kit with 1/2in impact wrench, 3/8in air ratchet, 7 sockets and accessories for fastening, bolt removal and workshop jobs.
Compact air grinder kit with a lightweight composite body and 10 micro carbide burrs, running at 90 PSI for restricted access cutting, milling and grinding.
Air sander for 10 x 330mm belts, running at 90psi and 6cfm, with a 1/4in BSP inlet and three belts in 60, 80 and 120 grit for narrow-area work.
90-degree air die grinder for 1/4in/6mm accessories, with up to 20000rpm free speed, a 1/4in BSP inlet and 6.2bar working pressure for confined areas.
Pneumatic car dent puller kit with a slide hammer, 75mm, 100mm and 125mm suction cups and pulling hook for shallow dents in flat body panels.
1/4in pneumatic die grinder with 22000rpm free speed, 1/4in BSP inlet and 5cfm air consumption for shaping, grinding and surface preparation.
6-piece air hammer drift set with long reach drifts and 10mm round shafts, made for Laser air hammers and useful for recessed or seized component removal.
7-piece air impact chisel adaptor set in Cr-Mo steel for 10mm 6-point and round air chisels, useful for seized bolts, bearings, bushings and dismantling work.
4-piece impact socket adapter set in chrome moly steel for converting between drive sizes. Useful for air impact work where access is tight and extra length gets in the way.
Compressed air blow gun with a 300mm angled nozzle, grip handle and 1/4in air inlet for clearing dust, debris and dirt from awkward areas.
Compressed air blow gun with 100mm angled nozzle, lockable trigger and grip handle for clearing dust, swarf and debris in garages and workshops.
18+ ID checkAir window seal cutter for windscreen removal, supplied with 3 blades, 4-speed regulator, safety trigger and adjustable rear exhaust control.
Diesel injector removal tool kit for compatible injectors and 5/8in thread adaptors, used with air vibration hammers or manually in restricted spaces.
154-piece impact socket kit with a 1/2in air impact wrench, 1/4in air ratchet, deep sockets and a 4 drawer tool box for garage repairs and servicing.
Pneumatic CV boot tool for installing uni-fit CV joint boots, with air-controlled expanding fingers, 72-130psi working pressure and a 1/4in air inlet.
Air tools for workshop, bodywork and site jobs, run from a compressor. Die grinder and angle grinder models sit alongside 75mm air cut off tools and orbital, belt and straight line air sanders. An air hammer kit with needle descaler, chisel and drift sets, air drills, nibblers, shears and body saws handle metalwork, and each air nail gun is a coil, strip or palm nailer. You will also find several air blow gun styles, 90L and 220L sandblasting cabinet models and a 200L 3HP air compressor.
The sub-sections hold air impact wrenches from 3/8in to 1in drive, air ratchets in 1/4in, 3/8in and 1/2in drive, HVLP and gravity feed spray guns, and air lines and fittings, from hoses and hose reels to 1/4in, 3/8in and 1/2in BSP couplers. Check the air use of a tool against your compressor before buying.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy