Spirit Level 24in 600mm Cast Aluminium Heavy Duty
CT4206 £21.49 inc. VAT In stock · Free deliveryHeavy duty spirit level with a 24in / 600mm cast aluminium frame, milled surface, 90 and 180 degree vials, 0.5mm/M accuracy and hammer assist pads.
Construction tools for builders, tradespeople and DIY users, covering bricklaying, plastering, site work, decorating and related fitting tasks. Browse sections for pry bars, lines, trowels and onsite equipment, with jointer sets, marking tools and cable access kits among the products available for different stages of the job.
Showing 265–288 of 368 resultsSorted by popularity

Heavy duty spirit level with a 24in / 600mm cast aluminium frame, milled surface, 90 and 180 degree vials, 0.5mm/M accuracy and hammer assist pads.

Cross key wrench for plumbing and sanitary jobs, covering radiator valves, lockshields, hanger bolts, vanity fittings and tube plugs in one tool.

Adjustable D type brick tongs for carrying 6 to 10 bricks at a time, with automatic clamping jaws and a 400-670mm opening for quicker site handling.

Tap reseating kit with 3 steel cutters in 11/16in, 3/4in and 1in sizes for restoring worn valve seats on 1/2in and 3/4in taps during plumbing repairs.

600mm steel wrecking bar with a nail puller at one end and chisel tip at the other for timber stripping, flooring removal, demolition and repair work.

Manual vacuum suction cup drain unblocker for clearing minor sink, bath and waste outlet blockages around the home. A simple tool for everyday drain maintenance.

10in plasterers trowel with a soft-grip handle for working around pipework, tight corners and awkward edges during plaster patching and finishing.

200mm grout remover for clearing old and discoloured grout, with a tungsten carbide grit edge, carbide blades and a long soft grip handle.

Solid steel zinc plated mortar spike for securing internal profiles in perp joints during bricklaying and block work, helping keep profiles steady on site.

300mm / 12in internal profile clamp in solid steel with a zinc plated finish and 80mm T-bolt screw for holding bricklaying profiles during building work.

6.5HP petrol compactor with a 510 x 350mm plate, 1210kg impact force and stated 150mm compaction depth for paths and patios, supplied with a wheel kit.

Petrol concrete vibrator drive engine with a 6.5HP 196 cc motor, 3600 rpm maximum speed and 3.6 L fuel tank, compatible with the CT1701 vibrator poker and CT3832 water pump.

Brick bolster chisel with a 75mm flat blade, 267mm overall length and rubber hand guard for cutting, breaking and removing brick, block, masonry and concrete.

4in / 100mm brick pointing trowel with a wooden handle for smaller mortar joints, repointing and repairs in tight areas around walls, patios and steps.

1.5m sink drain cleaner with flexible spring wire and a corkscrew tip for removing hair, soap scum and debris from sinks, baths, showers and toilets.

Heavy-duty manhole cover lifting key for lifting and replacing standard covers, made from heat-treated carbon steel and 18in long.

Heavy duty manual ceramic tile cutter for tiles up to 1000mm long and 14mm thick, with a 30cm adjustable measuring gauge and metal extension arm.

300mm nail puller bar with a grip and compact design for pulling nails and prising trim during carpentry and repair work.

11in steel skeleton caulking gun for most 380-425ml cartridges, including 400ml sizes, with a plunger and release lever for controlled sealant application.
18+ ID check12in / 300mm long handle paint scraper with a spare blade stored in the handle for removing paint, sealant and stubborn surface residue.

Refillable retractable carpenter pencil with plastic body, 12 long lasting leads and sharpener for clear marking on timber, board, brick and other site materials.

10-piece cable access rods and fittings kit with 1000mm glass reinforced polyester rods, hook and ring ends and a flexi extender for cable routing.

Air pump drain blaster for clearing sink, bath, toilet and pipe blockages, supplied with 4 adaptors for more controlled use around common drains.

2-piece replacement pipe cutter wheel set for compatible 15mm, 22mm and 28mm tube cutters, helping keep clean cutting performance for regular plumbing work.
Construction tools for bricklaying, plastering, concreting, decorating, plumbing and site work. The building tools are split into sections for pry bars and wrecking bars, trowels, plastering tools, brick lines, spirit levels, bolsters and chisels, and scrapers for paint, floors, wallpaper and yards, with brick cutters, profile clamps and brick tongs among the bricklaying tools.
For site work there are jack hammers, concrete breakers, a disc cutter and a petrol log splitter, plate compactors and a tamping rammer, a concrete vibrating poker and rake, diesel and petrol generators and industrial space heaters. Painting and decorating covers paint brushes, rollers and mixer paddles, while plumbing and tiling has pipe cutters, pipe benders, drain rods and tile cutters.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy