Radiator Bleed Key Set 2pc Brass Valve Tool
CT1482 £5.99 inc. VAT In stock · Free delivery2-piece brass radiator key set for opening bleed valves and releasing trapped air during home heating checks, landlord maintenance and radiator servicing.
Construction tools for builders, tradespeople and DIY users, covering bricklaying, plastering, site work, decorating and related fitting tasks. Browse sections for pry bars, lines, trowels and onsite equipment, with jointer sets, marking tools and cable access kits among the products available for different stages of the job.
Showing 313–336 of 368 resultsSorted by popularity

2-piece brass radiator key set for opening bleed valves and releasing trapped air during home heating checks, landlord maintenance and radiator servicing.

24in swan neck demolition bar for prying, lifting and freeing materials during strip-outs, construction work, renovation and general site clearance.

36in heavy duty wrecking bar with a T-type nose and 19mm diameter for prising, pulling and freeing fixed materials during demolition and strip-out work.

48in bent end pry bar made from high carbon steel with a go-thru handle for added leverage in demolition, lifting, separating and repair work.

Insulated kidney punner hand tamper with a half moon head for compacting earth, hardcore and tarmac in tight areas around posts, poles and columns.
18+ ID checkLong-handled floor scraper with a 4in forged head and 54in ash wood handle, useful for lifting stubborn material from floors, paving and hard surfaces.

Portable petrol generator with 3200W rated AC output, 3500W surge capacity, 230V at 50Hz and electric or pull cord start for backup power.

Petrol post driver with a 37.7cc 4-stroke air cooled engine, for posts from 30mm to 120mm diameter. Hand pull start, with 69mm, 100mm and 120mm piling sleeves.

15kW propane LPG space heater with 51,000 BTU maximum heat output, 230V power and 580 cubic metres per hour airflow for garages, workshops and factories.

2100W 230V concrete breaker hammer with 85J impact energy and a 1600 bpm rate, supplied with point and flat chisels for concrete and masonry removal.

Petrol jack hammer with a 52cc 2.4hp 2-stroke engine and 38mm fitting, supplied with flat and pointed chisels for concrete, brick and block breaking.

Electric start petrol generator with approximately 2.5kW rated and 2.8kW maximum output, 115V and 230V voltage options, and a 13L fuel tank.

Diesel generator with 296cc engine and electric start, suited to site, workshop or standby backup power when mains supply is unavailable.

A petrol inverter generator with a 53cc forced air-cooled, single-cylinder, four-stroke OHV engine. It gives a rated output of 0.9kW (0.9kVA) at 4800rpm and a maximum output of 1.0kW (1.0kVA) at 5300rpm, with inverter technology supplying 230V AC at 50Hz alongside a 12V 5A DC output. Used for powering tools, lights and small appliances where…

3500W 12V power inverter with modified sine wave output, 220-240V AC at 50Hz and a 5V 2.1A USB port for vehicles, boats and motorhomes.

Portable diesel generator with 4.5kW rated and 5kW maximum output, 115V and 230V AC supplies, a 16L fuel tank and 148kg net weight.

48in demolition bar made from forged high carbon steel, hardened and tempered for heavy duty lifting, prising and wrecking on site or in the workshop.

2-piece aluminium set with a 15mm pipe bender guide and a 22mm pipe bender guide for compatible CT0238 and CT2615 tools during plumbing and repair work.

72in/1830mm heavy duty spirit level tool with a ribbed frame for checking walls, frames, brickwork and alignment during site work and renovation.

110V 1500W concrete breaker hammer delivering 45J at 1900bpm, supplied with flat and point chisels for heavy concrete and masonry demolition work.

Concrete edging trowel with a bronze body for shaping and smoothing wet cement and concrete edges on patios, paths, slabs and driveways.

3-piece pry bar set with 8in, 10in and 16in bars, 180° rotating heads and 14 locking positions for better access and leverage in tight spaces.

600W porcelain tile cutter with a 180mm diamond blade, 230V supply and 385 x 395mm table, also suitable for wet cutting of ceramic tiles.

Ratchet pipe tube cutter for PVC and most types of plastic up to 42mm, providing controlled cuts in stages during plumbing, repairs and maintenance.
Construction tools for bricklaying, plastering, concreting, decorating, plumbing and site work. The building tools are split into sections for pry bars and wrecking bars, trowels, plastering tools, brick lines, spirit levels, bolsters and chisels, and scrapers for paint, floors, wallpaper and yards, with brick cutters, profile clamps and brick tongs among the bricklaying tools.
For site work there are jack hammers, concrete breakers, a disc cutter and a petrol log splitter, plate compactors and a tamping rammer, a concrete vibrating poker and rake, diesel and petrol generators and industrial space heaters. Painting and decorating covers paint brushes, rollers and mixer paddles, while plumbing and tiling has pipe cutters, pipe benders, drain rods and tile cutters.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy